Featured Research

from universities, journals, and other organizations

Faulty behavior: New earthquake fault models show that 'stable' zones may contribute to the generation of massive earthquakes

Date:
January 9, 2013
Source:
California Institute of Technology
Summary:
In an earthquake, ground motion is the result of waves emitted when the two sides of a fault move rapidly past each other. Not all fault segments move so quickly, however -- some slip slowly and are considered to be "stable." One hypothesis suggests that creeping fault behavior is persistent over time, with stable segments acting as barriers to fast-slipping earthquakes. But a new study shows that this might not be true.

Numerical simulations illustrate that fault segments can move slowly and stably over long periods of time and later host large earthquakes. Dashed lines represent slow slip every 50 years along a cross-section of the fault, with the numbers indicating the simulated time in years. Earthquakes are shown by solid lines plotted every second. The area marked patch B can both slip slowly (e.g., dashed lines above the 4,500 year mark) and participate in large earthquakes (e.g., yellow event).
Credit: Nadia Lapusta / Caltech

In an earthquake, ground motion is the result of waves emitted when the two sides of a fault move -- or slip -- rapidly past each other, with an average relative speed of about three feet per second. Not all fault segments move so quickly, however -- some slip slowly, through a process called creep, and are considered to be "stable," e.g. not capable of hosting rapid earthquake-producing slip. One common hypothesis suggests that such creeping fault behavior is persistent over time, with currently stable segments acting as barriers to fast-slipping, shake-producing earthquake ruptures. But a new study by researchers at the California Institute of Technology (Caltech) and the Japan Agency for Marine-Earth Science and Technology (JAMSTEC) shows that this might not be true.

"What we have found, based on laboratory data about rock behavior, is that such supposedly stable segments can behave differently when an earthquake rupture penetrates into them. Instead of arresting the rupture as expected, they can actually join in and hence make earthquakes much larger than anticipated," says Nadia Lapusta, professor of mechanical engineering and geophysics at Caltech and coauthor of the study, published January 9 in the journal Nature.

She and her coauthor, Hiroyuki Noda, a scientist at JAMSTEC and previously a postdoctoral scholar at Caltech, hypothesize that this is what occurred in the 2011 magnitude 9.0 Tohoku-Oki earthquake, which was unexpectedly large.

Fault slip, whether fast or slow, results from the interaction between the stresses acting on the fault and friction, or the fault's resistance to slip. Both the local stress and the resistance to slip depend on a number of factors such as the behavior of fluids permeating the rocks in Earth's crust. So, the research team formulated fault models that incorporate laboratory-based knowledge of complex friction laws and fluid behavior, and developed computational procedures that allow the scientists to numerically simulate how those model faults will behave under stress.

"The uniqueness of our approach is that we aim to reproduce the entire range of observed fault behaviors -- earthquake nucleation, dynamic rupture, postseismic slip, interseismic deformation, patterns of large earthquakes -- within the same physical model; other approaches typically focus only on some of these phenomena," says Lapusta.

In addition to reproducing a range of behaviors in one model, the team also assigned realistic fault properties to the model faults, based on previous laboratory experiments on rock materials from an actual fault zone -- the site of the well-studied 1999 magnitude 7.6 Chi-Chi earthquake in Taiwan.

"In that experimental work, rock materials from boreholes cutting through two different parts of the fault were studied, and their properties were found to be conceptually different," says Lapusta. "One of them had so-called velocity-weakening friction properties, characteristic of earthquake-producing fault segments, and the other one had velocity-strengthening friction, the kind that tends to produce stable creeping behavior under tectonic loading. However, these 'stable' samples were found to be much more susceptible to dynamic weakening during rapid earthquake-type motions, due to shear heating."

Lapusta and Noda used their modeling techniques to explore the consequences of having two fault segments with such lab-determined fault-property combinations. They found that the ostensibly stable area would indeed occasionally creep, and often stop seismic events, but not always. From time to time, dynamic rupture would penetrate that area in just the right way to activate dynamic weakening, resulting in massive slip. They believe that this is what happened in the Chi-Chi earthquake; indeed, the quake's largest slip occurred in what was believed to be the "stable" zone.

"We find that the model qualitatively reproduces the behavior of the 2011 magnitude 9.0 Tohoku-Oki earthquake as well, with the largest slip occurring in a place that may have been creeping before the event," says Lapusta. "All of this suggests that the underlying physical model, although based on lab measurements from a different fault, may be qualitatively valid for the area of the great Tohoku-Oki earthquake, giving us a glimpse into the mechanics and physics of that extraordinary event."

If creeping segments can participate in large earthquakes, it would mean that much larger events than seismologists currently anticipate in many areas of the world are possible. That means, Lapusta says, that the seismic hazard in those areas may need to be reevaluated.

For example, a creeping segment separates the southern and northern parts of California's San Andreas Fault. Seismic hazard assessments assume that this segment would stop an earthquake from propagating from one region to the other, limiting the scope of a San Andreas quake. However, the team's findings imply that a much larger event may be possible than is now anticipated -- one that might involve both the Los Angeles and San Francisco metropolitan areas.

"Lapusta and Noda's realistic earthquake fault models are critical to our understanding of earthquakes -- knowledge that is essential to reducing the potential catastrophic consequences of seismic hazards," says Ares Rosakis, chair of Caltech's division of engineering and applied science. "This work beautifully illustrates the way that fundamental, interdisciplinary research in the mechanics of seismology at Caltech is having a positive impact on society."

Now that they've been proven to qualitatively reproduce the behavior of the Tohoku-Oki quake, the models may be useful for exploring future earthquake scenarios in a given region, "including extreme events," says Lapusta. Such realistic fault models, she adds, may also be used to study how earthquakes may be affected by additional factors such as human-made disturbances resulting from geothermal energy harvesting and CO2 sequestration. "We plan to further develop the modeling to incorporate realistic fault geometries of specific well-instrumented regions, like Southern California and Japan, to better understand their seismic hazard."

"Creeping fault segments can turn from stable to destructive due to dynamic weakening" appears in the January 9 issue of the journal Nature. Funding for this research was provided by the National Science Foundation; the Southern California Earthquake Center; the Gordon and Betty Moore Foundation; and the Ministry of Education, Culture, Sports, Science and Technology in Japan.


Story Source:

The above story is based on materials provided by California Institute of Technology. The original article was written by Katie Neith. Note: Materials may be edited for content and length.


Journal Reference:

  1. Hiroyuki Noda, Nadia Lapusta. Stable creeping fault segments can become destructive as a result of dynamic weakening. Nature, 2013; DOI: 10.1038/nature11703

Cite This Page:

California Institute of Technology. "Faulty behavior: New earthquake fault models show that 'stable' zones may contribute to the generation of massive earthquakes." ScienceDaily. ScienceDaily, 9 January 2013. <www.sciencedaily.com/releases/2013/01/130109151204.htm>.
California Institute of Technology. (2013, January 9). Faulty behavior: New earthquake fault models show that 'stable' zones may contribute to the generation of massive earthquakes. ScienceDaily. Retrieved April 16, 2014 from www.sciencedaily.com/releases/2013/01/130109151204.htm
California Institute of Technology. "Faulty behavior: New earthquake fault models show that 'stable' zones may contribute to the generation of massive earthquakes." ScienceDaily. www.sciencedaily.com/releases/2013/01/130109151204.htm (accessed April 16, 2014).

Share This



More Earth & Climate News

Wednesday, April 16, 2014

Featured Research

from universities, journals, and other organizations


Featured Videos

from AP, Reuters, AFP, and other news services

How Mt. Everest Helped Scientists Research Diabetes

How Mt. Everest Helped Scientists Research Diabetes

Newsy (Apr. 15, 2014) British researchers were able to use Mount Everest's low altitudes to study insulin resistance. They hope to find ways to treat diabetes. Video provided by Newsy
Powered by NewsLook.com
The Walking, Talking Oil-Drigging Rig

The Walking, Talking Oil-Drigging Rig

Reuters - Business Video Online (Apr. 15, 2014) Pennsylvania-based Schramm is incorporating modern technology in its next generation oil-drigging rigs, making them smaller, safer and smarter. Ernest Scheyder reports. Video provided by Reuters
Powered by NewsLook.com
In Washington, a Push to Sterilize Stray Cats

In Washington, a Push to Sterilize Stray Cats

AFP (Apr. 14, 2014) To curb the growing numbers of feral cats in the US capital, the Washington Humane Society is encouraging residents to set traps and bring the animals to a sterilization clinic, after which they are released.. Duration: 02:29 Video provided by AFP
Powered by NewsLook.com
Dutch Highway Introduces Glow-In-The-Dark Paint

Dutch Highway Introduces Glow-In-The-Dark Paint

Newsy (Apr. 14, 2014) A Dutch highway has become the first lit by glow-in-the-dark paint — a project aimed at reducing street light use. Video provided by Newsy
Powered by NewsLook.com

Search ScienceDaily

Number of stories in archives: 140,361

Find with keyword(s):
Enter a keyword or phrase to search ScienceDaily for related topics and research stories.

Save/Print:
Share:

Breaking News:
from the past week

In Other News

... from NewsDaily.com

Science News

Health News

Environment News

Technology News



Save/Print:
Share:

Free Subscriptions


Get the latest science news with ScienceDaily's free email newsletters, updated daily and weekly. Or view hourly updated newsfeeds in your RSS reader:

Get Social & Mobile


Keep up to date with the latest news from ScienceDaily via social networks and mobile apps:

Have Feedback?


Tell us what you think of ScienceDaily -- we welcome both positive and negative comments. Have any problems using the site? Questions?
Mobile: iPhone Android Web
Follow: Facebook Twitter Google+
Subscribe: RSS Feeds Email Newsletters
Latest Headlines Health & Medicine Mind & Brain Space & Time Matter & Energy Computers & Math Plants & Animals Earth & Climate Fossils & Ruins