NEW: Find great deals on the latest gadgets and more in the ScienceDaily Store!
Science News
from research organizations

Optimizing drying parameters for milk powders

Date:
March 2, 2016
Source:
South Dakota State University
Summary:
Making milk powder seems simple, but it’s not. Creamer must dissolve very quickly in hot coffee, but powder density is critical for infant formula. Dairy scientists and chemical engineers are using a single-droplet spray dryer and computation fluid dynamics modeling to determine the drying parameters needed to produce powders with those specific properties.
Share:
FULL STORY

Doctoral student Hiral Vora, right, works on the single-droplet spray dryer with former assistant professor Hasmukh Patel.
Credit: Emily Weber

Australia and South Dakota are on opposite sides of the world, but collaboration between South Dakota State University dairy scientists and chemical engineers in Australia will make developing new dairy ingredients with specific functional properties easier.

SDSU dairy researchers are using a bench-scale single-droplet spray dryer to determine the exact drying parameters for an ingredient with the desired functional properties. Professor Cordelia Selomulya and her team at Monash University near Melbourne, Australia, then utilizes the data on the drying behavior of different materials to develop a computational fluid dynamics model to predict the range of drying parameters needed to produce a powder with those properties in a spray dryer.

"Our expertise is in manufacturing and functionality; theirs is in engineering and modeling," said professor Lloyd Metzer, who leads the SDSU research team. "It's an ideal collaboration because our areas of expertise are complimentary."

The project was begun by former assistant professor Hasmukh Patel, who is now a senior principal scientist at Land O'Lakes in Minneapolis.

The SDSU portion of the three-year project, which began in 2014, is supported by a Dairy Management Inc. grant for more than $250,000. The research focuses on optimizing spray-drying conditions for milk powders and dairy ingredients, such as whole milk powder, whey and milk protein concentrates and isolates and infant formula. Doctoral student Hiral Vora and other SDSU dairy science staff are working on the project.

Determining desired properties

When it comes to spray-drying, any number of conditions can affect powder properties, including the characteristics of the material being dried, the nozzle type and amount of pressure behind nozzle, the fluid pre-heat temperature and the air inlet and outlet temperature, according to Metzger.

Additionally the desired powder properties will vary for different products. For instance, in an application like coffee creamer, he pointed out, the powder must dissolve very quickly in hot coffee and it may be required to foam. In other applications like infant formula, the density of the powder is critical to ensure that each scoop of powder has the correct nutrient content.

The dairy industry now uses trial and error or past experience to adjust drying conditions to achieve the desired powder characteristics, Metzger explained.

This approach assumes what happens with a small batch using a lab-scale or pilot-scale dryer will work on a larger scale, according to Selomulya. However, she cautioned, "both are complex systems in their own right, so the drying history will be different for each dryer. With the variation of feed formulation in dairy, trial and error is not an effective approach."

Developing predictive model

Selomulya and her team will calculate the drying rate of the material using experimental data, such as changes in mass, droplet temperature and size, along with morphological changes, such as skin formation, from the single-droplet dryer combined with a reaction engineering modeling approach. The results will then be used in a computational fluid dynamics model to predict what will happen inside an industrial spray dryer.

"It's all about trying to simulate on a small scale with the single-particle dryer and relate that to what happens in the big dryer," Metzger said. The semicommercial-scale dryer at the Davis Dairy Plant will be used to validate the methodology and scale up the models developed.

This collaborative effort promises to streamline the process of changing formulations and developing new dairy ingredients -- and that could translate into huge savings for the dairy industry.


Story Source:

Materials provided by South Dakota State University. Note: Content may be edited for style and length.


Cite This Page:

South Dakota State University. "Optimizing drying parameters for milk powders." ScienceDaily. ScienceDaily, 2 March 2016. <www.sciencedaily.com/releases/2016/03/160302182225.htm>.
South Dakota State University. (2016, March 2). Optimizing drying parameters for milk powders. ScienceDaily. Retrieved September 28, 2016 from www.sciencedaily.com/releases/2016/03/160302182225.htm
South Dakota State University. "Optimizing drying parameters for milk powders." ScienceDaily. www.sciencedaily.com/releases/2016/03/160302182225.htm (accessed September 28, 2016).