New! Sign up for our free email newsletter.
Science News
from research organizations

NASA's Webb Telescope flight backplane section completed

Date:
April 24, 2012
Source:
NASA
Summary:
The center section of the backplane structure that will fly on NASA's James Webb Space Telescope has been completed, marking an important milestone in the telescope's hardware development. The backplane will support the telescope's beryllium mirrors, instruments, thermal control systems and other hardware throughout its mission.
Share:
FULL STORY

The center section of the backplane structure that will fly on NASA's James Webb Space Telescope has been completed, marking an important milestone in the telescope's hardware development. The backplane will support the telescope's beryllium mirrors, instruments, thermal control systems and other hardware throughout its mission.

"Completing the center section of the backplane is an important step in completing the sophisticated telescope structure," said Lee Feinberg, optical telescope element manager for the Webb telescope at NASA's Goddard Space Flight Center in Greenbelt, Md. "This fabrication success is the result of innovative engineering dating back to the technology demonstration phase of the program."

The center section, or primary mirror backplane support structure, will hold Webb's 18-segment, 21-foot-diameter primary mirror nearly motionless while the telescope peers into deep space. The center section is the first of the three sections of the backplane to be completed.

Measuring approximately 24 by 12 feet yet weighing only 500 pounds, the center section of the backplane meets unprecedented thermal stability requirements. The backplane holds the alignment of the telescope's optics through the rigors of launch and over a wide range of operating temperatures, which reach as cold as -- 406 degrees Fahrenheit. During science operations, the backplane precisely keeps the 18 primary mirror segments in place, permitting the mirrors to form a single, pristine shape needed to take sharp images.

The Northrop Grumman Corporation in Redondo Beach, Calif., and its teammate ATK in Magna, Utah, completed construction of the center section. Northrop Grumman is under contract to Goddard for the design and development of Webb's sunshield, telescope and spacecraft. ATK manufactured 1,781 composite parts of the center section using lightweight graphite materials and advanced manufacturing techniques.

Successor to the Hubble Space Telescope, the Webb telescope is the world's next-generation space observatory and will be the most powerful space telescope ever built. It will observe the most distant objects in the universe, provide images of the very first galaxies ever formed and study planets around distant stars. The Webb telescope is a joint project of NASA, the European Space Agency and the Canadian Space Agency.

For related images of the Webb telescope backplane, visit: http://www.nasa.gov/topics/technology/features/webb-backplane.html

For a "Behind the Webb" series video about the backplane, visit: http://webbtelescope.org/webb_telescope/behind_the_webb/11

For more information about the Webb telescope, visit: http://www.jwst.nasa.gov


Story Source:

Materials provided by NASA. Note: Content may be edited for style and length.


Cite This Page:

NASA. "NASA's Webb Telescope flight backplane section completed." ScienceDaily. ScienceDaily, 24 April 2012. <www.sciencedaily.com/releases/2012/04/120424145747.htm>.
NASA. (2012, April 24). NASA's Webb Telescope flight backplane section completed. ScienceDaily. Retrieved March 18, 2024 from www.sciencedaily.com/releases/2012/04/120424145747.htm
NASA. "NASA's Webb Telescope flight backplane section completed." ScienceDaily. www.sciencedaily.com/releases/2012/04/120424145747.htm (accessed March 18, 2024).

Explore More

from ScienceDaily

RELATED STORIES