Featured Research

from universities, journals, and other organizations

Chemist's Technique Enables Creation Of Novel Carbon Nanoparticles

Date:
May 11, 2004
Source:
Washington University In St. Louis
Summary:
Using a technique pioneered by Washington University in St. Louis chemist Karen Wooley, Ph.D., scientists have developed a novel way to make discrete carbon nanoparticles for electrical components used in industry and research.

Using a technique pioneered by Washington University in St. Louis chemist Karen Wooley, Ph.D., scientists have developed a novel way to make discrete carbon nanoparticles for electrical components used in industry and research.

The method uses polyacrylonitrile (PAN) as a nanoparticle precursor and is relatively low cost, simple and potentially scalable to commercial production levels. It provides significant advantages over existing technologies to make well-defined nanostructured carbons. Using the method, PAN copolymers serving as carbon precursors can be deposited as thin films on surfaces (for example, silicon wafers), where they can be patterned and further processed using techniques currently employed to fabricate microelectronic devices. Such a seamless manufacturing process is important to generate integrated devices and would be difficult to achieve with other methods currently used to synthesize nanostructured carbons, said Tomasz Kowalewski, Ph.D., assistant professor of chemistry at the Mellon College of Science and principal investigator on this research. The research was presented March 28, 2004, at the 227th annual meeting of the American Chemical Society in Anaheim, Calif. The research findings have been accepted for publication in Angewandte Chemie, International Edition. The work was funded by the National Science Foundation.

The new approach is based on a method the Carnegie Mellon group previously developed to form nanostructured carbons by using block copolymers in which PAN is linked to other polymers with which it normally does not mix. In the current method, PAN, a water-hating compound, is copolymerized with polyacrylic acid, a water-loving polymer. In water-containing solutions, PAN-polyacrylic acid copolymers self assemble into nanoscale droplets, or micelles. Each micelle has a water-insoluble PAN core and a water-soluble polyacrylic acid outer coat that forms an outer shell.

The linchpin to make carbon nanoparticles from micelles is a shell-crosslinking technique that Wooley developed with Ph.D. student K. Bruce Thurmond II – now a research scientist at Access Pharmaceuticals, Dallas, Tex. – in the late 1990s at Washington University. Whereas polymer micelles are dynamic assemblies that can be reorganized or destroyed, the shell crosslinking technique allowed the Carnegie Mellon researchers to contain the PAN within the polyacrylic acid to maintain discrete nano-objects during manipulation of the materials. The scientists then deposited thin and ultra-thin films of these nanoparticles on various substrates. The Carnegie Mellon team heated the nanoparticles to high temperatures in a process called pyrolysis, decomposing the polyacrylic acid shell scaffolding and converting the chemically stabilized PAN domains into arrays of discrete carbon nanostructures.

"The preparation, manipulation and study of these highly interesting, discrete carbon nanoparticles were facilitated by an interdisciplinary collaboration that has involved the open sharing of knowledge, ideas, resources and researchers between several laboratories located at Washington University and Carnegie Mellon University," said Wooley. "This kind of cross-institutional teamwork provides for enhanced student experiences and allows for research accomplishments that would not ordinarily be possible, activities which have been supported in large part by the National Science Foundation."

"This work really illustrates a particularly attractive strategy in the evolution of nanotechnology," said Kowalewski, principal investigator on this research and a postdoctoral researcher at Washington University in the late 1990s, and long-time collaborator with Wooley. "Our well-defined carbon nanoparticles should find a wide range of applications, especially in energy storage/conversion devices and in display technologies."

The Carnegie Mellon group is currently working on using carbon nanoparticles as active materials in field emitter arrays for flat panel screen displays. This technology to produce carbon nanostructures also could be adapted to produce solar panels that convert sunlight into electrical energy. Other applications include the development of carbon-based nanosensors or high-surface area electrodes for use in biotechnology or medicine.


Story Source:

The above story is based on materials provided by Washington University In St. Louis. Note: Materials may be edited for content and length.


Cite This Page:

Washington University In St. Louis. "Chemist's Technique Enables Creation Of Novel Carbon Nanoparticles." ScienceDaily. ScienceDaily, 11 May 2004. <www.sciencedaily.com/releases/2004/05/040511042304.htm>.
Washington University In St. Louis. (2004, May 11). Chemist's Technique Enables Creation Of Novel Carbon Nanoparticles. ScienceDaily. Retrieved September 16, 2014 from www.sciencedaily.com/releases/2004/05/040511042304.htm
Washington University In St. Louis. "Chemist's Technique Enables Creation Of Novel Carbon Nanoparticles." ScienceDaily. www.sciencedaily.com/releases/2004/05/040511042304.htm (accessed September 16, 2014).

Share This



More Matter & Energy News

Tuesday, September 16, 2014

Featured Research

from universities, journals, and other organizations


Featured Videos

from AP, Reuters, AFP, and other news services

Manufacturer Prints 3-D Car In Record Time

Manufacturer Prints 3-D Car In Record Time

Newsy (Sep. 15, 2014) — Automobile manufacturer Local Motors created a drivable electric car using a 3-D printer. Printing the body only took 44 hours. Video provided by Newsy
Powered by NewsLook.com
Refurbished New York Subway Tunnel Unveiled After Sandy Damage

Refurbished New York Subway Tunnel Unveiled After Sandy Damage

Reuters - US Online Video (Sep. 15, 2014) — New York officials unveil subway tunnels that were refurbished after Superstorm Sandy. Nathan Frandino reports. Video provided by Reuters
Powered by NewsLook.com
Frustration As Drone Industry Outpaces Regulation In U.S.

Frustration As Drone Industry Outpaces Regulation In U.S.

Newsy (Sep. 14, 2014) — U.S. firms worry they’re falling behind in the marketplace as the FAA considers how to regulate commercial drones. Video provided by Newsy
Powered by NewsLook.com
Smart Gun Innovators Fear Backlash From Gun Rights Advocates

Smart Gun Innovators Fear Backlash From Gun Rights Advocates

Newsy (Sep. 14, 2014) — Winners of a contest for smart gun design are asking not to be named after others in the industry received threats for marketing similar products. Video provided by Newsy
Powered by NewsLook.com

Search ScienceDaily

Number of stories in archives: 140,361

Find with keyword(s):
 
Enter a keyword or phrase to search ScienceDaily for related topics and research stories.

Save/Print:
Share:  

Breaking News:
from the past week

In Other News

... from NewsDaily.com

Science News

Health News

Environment News

Technology News



Save/Print:
Share:  

Free Subscriptions


Get the latest science news with ScienceDaily's free email newsletters, updated daily and weekly. Or view hourly updated newsfeeds in your RSS reader:

Get Social & Mobile


Keep up to date with the latest news from ScienceDaily via social networks and mobile apps:

Have Feedback?


Tell us what you think of ScienceDaily -- we welcome both positive and negative comments. Have any problems using the site? Questions?
Mobile iPhone Android Web
Follow Facebook Twitter Google+
Subscribe RSS Feeds Email Newsletters
Latest Headlines Health & Medicine Mind & Brain Space & Time Matter & Energy Computers & Math Plants & Animals Earth & Climate Fossils & Ruins