Featured Research

from universities, journals, and other organizations

Tiny Ion Pump Sets New Standard In Cooling Hot Computer Chips

Date:
August 28, 2006
Source:
University of Washington
Summary:
University of Washington researchers have succeeded in building a cooling device tiny enough to fit on a computer chip that could work reliably and efficiently with the smallest microelectronic components. The feat represents the first time a working prototype of such a device has been built at the microscale.

Infrared images show how a new UW micro-pump cools a heated surface: (Top) The air pump is off. (Bottom) The air pump is on.
Credit: Image courtesy of University of Washington

University of Washington researchers have succeeded in building a cooling device tiny enough to fit on a computer chip that could work reliably and efficiently with the smallest microelectronic components.

The device, which uses an electrical charge to create a cooling air jet right at the surface of the chip, could be critical to advancing computer technology because future chips will be smaller, more tightly packed and are likely to run hotter than today's chips. As a result, tomorrow's computers will need cooling systems far more efficient than the fans and heat sinks that are used today.

"With this pump, we are able to integrate the entire cooling system right onto a chip," said Alexander Mamishev, associate professor of electrical engineering and principal investigator on the project. "That allows for cooling in applications and spaces where it just wasn't realistic to do before."

The micro-pump also represents the first time that anyone has built a working device at this scale that uses this method, Mamishev added.

"The idea has been around for several years," he said. "But until now it hasn't been physically demonstrated in terms of a working prototype."

Mamishev and doctoral students Nels Jewell-Larsen and Chi-Peng Hsu presented a paper on the device at the American Institute of Aeronautics and Astronautics/American Society of Mechanical Engineers Joint Thermophysics and Heat Transfer Conference earlier this summer and are scheduled to give an additional presentation this fall. In addition, the UW researchers and collaborators with Kronos Advanced Technologies and Intel Corp. have been awarded a $100,000 grant from the Seattle-based Washington Technology Center for the second phase of the project.

The device utilizes an electrical field to accelerate air to speeds previously possible only with the use of traditional blowers. Trial runs showed that the prototype device significantly cooled an actively heated surface on just 0.6 watts of power.

The prototype cooling chip contains two basic components: an emitter and a collector. The emitter has a tip radius of about 1 micron -- so small that up to 300 tips could fit across a human hair. The tip creates air ions, electrically charged particles that are propelled in an electric field to the collector surface. As the ions travel from tip to collector, they create an air jet that blows across the chip, taking heat with it. The volume of the airflow can be controlled by varying the voltage between the emitter and collector.

The findings are significant for future computing applications, which will incorporate denser circuitry to boost computing power. More circuitry equals more heat and a greater need for innovative cooling technologies that go beyond bulky, noisy and relatively inefficient fans and heat sinks -- metal plates with fins to increase surface area and help dissipate heat. Circulating liquids among the chips to draw away heat is one possibility, but computer chips and liquids don't mix well; the cost of a cooling system breakdown could be steep.

"Our goal is to develop advanced cooling systems that can be built right onto next-generation microchips," Jewell-Larsen said. "Such systems could handle both the increased heat generation of future chips and the fact that they would be distributed throughout a computer or electronic device."

Added Mamishev: "It promises a new dimension in thermal management strategy and design."

A few challenges remain, he added. One involves developing the mathematical models to control vast systems of chips with built-in coolers.

"These pumps end up being very complicated, dynamic systems," Mamishev said. "You have flow on a microscale, electrohydrodynamic forces, electrical fields and moving charges."

A second challenge is identifying the best materials to use in building devices that are high-performing and durable.

"There is evidence that nanotubes and other nano-structures could give significant performance gains," Jewell-Larsen said. "Those are avenues we are currently pursuing."


Story Source:

The above story is based on materials provided by University of Washington. Note: Materials may be edited for content and length.


Cite This Page:

University of Washington. "Tiny Ion Pump Sets New Standard In Cooling Hot Computer Chips." ScienceDaily. ScienceDaily, 28 August 2006. <www.sciencedaily.com/releases/2006/08/060823184802.htm>.
University of Washington. (2006, August 28). Tiny Ion Pump Sets New Standard In Cooling Hot Computer Chips. ScienceDaily. Retrieved September 22, 2014 from www.sciencedaily.com/releases/2006/08/060823184802.htm
University of Washington. "Tiny Ion Pump Sets New Standard In Cooling Hot Computer Chips." ScienceDaily. www.sciencedaily.com/releases/2006/08/060823184802.htm (accessed September 22, 2014).

Share This



More Matter & Energy News

Monday, September 22, 2014

Featured Research

from universities, journals, and other organizations


Featured Videos

from AP, Reuters, AFP, and other news services

Company Copies Keys From Photos

Company Copies Keys From Photos

Newsy (Sep. 22, 2014) A new company allows customers to make copies of keys by simply uploading a couple of photos. But could it also be great for thieves? Video provided by Newsy
Powered by NewsLook.com
Raw: SpaceX Rocket Carries 3-D Printer to Space

Raw: SpaceX Rocket Carries 3-D Printer to Space

AP (Sep. 22, 2014) A SpaceX Rocket launched from Cape Canaveral, carrying a custom-built 3-D printer into space. NASA envisions astronauts one day using the printer to make their own spare parts. (Sept. 22) Video provided by AP
Powered by NewsLook.com
Inside London's Massive Sewer Tunnel Project

Inside London's Massive Sewer Tunnel Project

AP (Sep. 22, 2014) Billions of dollars are being spent on a massive super sewer to take away London's vast output of waste, which is endangering the River Thames. (Sept. 22) Video provided by AP
Powered by NewsLook.com
Thousands March in NYC Over Climate Change

Thousands March in NYC Over Climate Change

AP (Sep. 21, 2014) Accompanied by drumbeats, wearing costumes and carrying signs, thousands of demonstrators filled the streets of Manhattan and other cities around the world on Sunday to urge policy makers to take action on climate change. (Sept. 21) Video provided by AP
Powered by NewsLook.com

Search ScienceDaily

Number of stories in archives: 140,361

Find with keyword(s):
Enter a keyword or phrase to search ScienceDaily for related topics and research stories.

Save/Print:
Share:

Breaking News:
from the past week

In Other News

... from NewsDaily.com

Science News

Health News

Environment News

Technology News



Save/Print:
Share:

Free Subscriptions


Get the latest science news with ScienceDaily's free email newsletters, updated daily and weekly. Or view hourly updated newsfeeds in your RSS reader:

Get Social & Mobile


Keep up to date with the latest news from ScienceDaily via social networks and mobile apps:

Have Feedback?


Tell us what you think of ScienceDaily -- we welcome both positive and negative comments. Have any problems using the site? Questions?
Mobile: iPhone Android Web
Follow: Facebook Twitter Google+
Subscribe: RSS Feeds Email Newsletters
Latest Headlines Health & Medicine Mind & Brain Space & Time Matter & Energy Computers & Math Plants & Animals Earth & Climate Fossils & Ruins