Graphene's star is rising as a material that could become essential to efficient, environmentally sound oil production. Rice University researchers are taking advantage of graphene's outstanding strength, light weight and solubility to enhance fluids used to drill oil wells.
The Rice University lab of chemist James Tour and scientists at M-I SWACO, a Texas-based supplier of drilling fluids and subsidiary of oil-services provider Schlumberger, have produced functionalized graphene oxide to alleviate the clogging of oil-producing pores in newly drilled wells.
The patented technique took a step closer to commercialization with the publication of new research this month in the American Chemical Society journal Applied Materials and Interfaces. Graphene is a one-atom-thick sheet of carbon that won its discoverers a Nobel Prize last year.
Rice's relationship with M-I SWACO began more than two years ago when the company funded the lab's follow-up to research that produced the first graphene additives for drilling fluids known as muds. These fluids are pumped downhole as part of the process to keep drill bits clean and remove cuttings. With traditional clay-enhanced muds, differential pressure forms a layer on the wellbore called a filter cake, which both keeps the oil from flowing out and drilling fluids from invading the tiny, oil-producing pores.
When the drill bit is removed and drilling fluid displaced, the formation oil forces remnants of the filter cake out of the pores as the well begins to produce. But sometimes the clay won't budge, and the well's productivity is reduced.
The Tour Group discovered that microscopic, pliable flakes of graphene can form a thinner, lighter filter cake. When they encounter a pore, the flakes fold in upon themselves and look something like starfish sucked into a hole. But when well pressure is relieved, the flakes are pushed back out by the oil.
All that was known two years ago. Since then, Tour and a research team led by Dmitry Kosynkin, a former Rice postdoctoral associate and now a petroleum engineer at Saudi Aramco, have been fine-tuning the materials.
They found a few issues that needed to be dealt with. First, pristine graphene is hard to disperse in water, so it is unsuitable for water-based muds. Graphene oxide (GO) turned out to be much more soluble in fresh water, but tended to coagulate in saltwater, the basis for many muds.
The solution was to "esterify" GO flakes with alcohol. "It's a simple, one-step reaction," said Tour, Rice's T.T. and W.F. Chao Chair in Chemistry as well as a professor of mechanical engineering and materials science and of computer science. "Graphene oxide functionalized with alcohol works much better because it doesn't precipitate in the presence of salts. There's nothing exotic about it."
In a series of standard American Petroleum Institute tests, the team found the best mix of functionalized GO to be a combination of large flakes and powdered GO for reinforcement. A mud with 2 percent functionalized GO formed a filter cake an average of 22 micrometers wide -- substantially smaller than the 278-micrometer cake formed by traditional muds. GO blocked pores many times smaller than the flakes' original diameter by folding.
Aside from making the filter cake much thinner, which would give a drill bit more room to turn, the Rice mud contained less than half as many suspended solids; this would also make drilling more efficient as well as more environmentally friendly. Tour and Andreas Lüttge, a Rice professor of Earth science and chemistry, reported last year that GO is reduced to graphite, the material found in pencil lead and a natural mineral, by common bacteria.
"The most exciting aspect is the ability to modify the GO nanoparticle with a variety of functionalities," said James Friedheim, corporate director of fluids research and development at M-I SWACO and a co-author of the research. "Therefore we can 'dial in' our application by picking the right organic chemistry that will suit the purpose. The trick is just choosing the right chemistry for the right purpose."
"There's still a lot to be worked out," Tour said. "We're looking at the rheological properties, the changes in viscosity under shear. In other words, we want to know how viscous this becomes as it goes through a drill head, because that also has implications for efficiency."
Muds may help graphene live up to its commercial promise, Tour said. "Everybody thinks of graphene in electronics or in composites, but this would be a use for large amounts of graphene, and it could happen soon," he said.
Friedheim agreed. "With the team we currently have assembled, Jim Tour's group and some development scientists at M-I SWACO, I am confident that we are close to both technical and commercial success."
Other authors of the paper are Rice graduate student Gabriel Ceriotti, former Rice research associates Kurt Wilson and Jay Lomeda, and M-I SWACO researchers Jason Scorsone and Arvind Patel.
- Dmitry V. Kosynkin, Gabriel Ceriotti, Kurt C. Wilson, Jay R. Lomeda, Jason T. Scorsone, Arvind D. Patel, James E. Friedheim, James M. Tour. Graphene Oxide as a High-Performance Fluid-Loss-Control Additive in Water-Based Drilling Fluids. ACS Applied Materials & Interfaces, 2011; 111213103240001 DOI: 10.1021/am2012799
Cite This Page: