New! Sign up for our free email newsletter.
Science News
from research organizations

Faster, more durable water filters: Plugging up leaky graphene

Date:
May 7, 2015
Source:
Massachusetts Institute of Technology
Summary:
For faster, longer-lasting water filters, some scientists are looking to graphene --thin, strong sheets of carbon -- to serve as ultrathin membranes, filtering out contaminants to quickly purify high volumes of water. Graphene's unique properties make it a potentially ideal membrane for water filtration or desalination. But there's been one main drawback to its wider use: Making membranes in one-atom-thick layers of graphene is a meticulous process that can tear the thin material -- creating defects through which contaminants can leak. Now engineers have devised a process to repair these leaks.
Share:
FULL STORY

For faster, longer-lasting water filters, some scientists are looking to graphene --thin, strong sheets of carbon -- to serve as ultrathin membranes, filtering out contaminants to quickly purify high volumes of water.

Graphene's unique properties make it a potentially ideal membrane for water filtration or desalination. But there's been one main drawback to its wider use: Making membranes in one-atom-thick layers of graphene is a meticulous process that can tear the thin material -- creating defects through which contaminants can leak.

Now engineers at MIT, Oak Ridge National Laboratory, and King Fahd University of Petroleum and Minerals (KFUPM) have devised a process to repair these leaks, filling cracks and plugging holes using a combination of chemical deposition and polymerization techniques. The team then used a process it developed previously to create tiny, uniform pores in the material, small enough to allow only water to pass through.

Combining these two techniques, the researchers were able to engineer a relatively large defect-free graphene membrane -- about the size of a penny. The membrane's size is significant: To be exploited as a filtration membrane, graphene would have to be manufactured at a scale of centimeters, or larger.

In experiments, the researchers pumped water through a graphene membrane treated with both defect-sealing and pore-producing processes, and found that water flowed through at rates comparable to current desalination membranes. The graphene was able to filter out most large-molecule contaminants, such as magnesium sulfate and dextran.

Rohit Karnik, an associate professor of mechanical engineering at MIT, says the group's results, published in the journal Nano Letters, represent the first success in plugging graphene's leaks.

"We've been able to seal defects, at least on the lab scale, to realize molecular filtration across a macroscopic area of graphene, which has not been possible before," Karnik says. "If we have better process control, maybe in the future we don't even need defect sealing. But I think it's very unlikely that we'll ever have perfect graphene -- there will always be some need to control leakages. These two [techniques] are examples which enable filtration."

Sean O'Hern, a former graduate research assistant at MIT, is the paper's first author. Other contributors include MIT graduate student Doojoon Jang, former graduate student Suman Bose, and Professor Jing Kong.

A delicate transfer

"The current types of membranes that can produce freshwater from saltwater are fairly thick, on the order of 200 nanometers," O'Hern says. "The benefit of a graphene membrane is, instead of being hundreds of nanometers thick, we're on the order of three angstroms -- 600 times thinner than existing membranes. This enables you to have a higher flow rate over the same area."

O'Hern and Karnik have been investigating graphene's potential as a filtration membrane for the past several years. In 2009, the group began fabricating membranes from graphene grown on copper -- a metal that supports the growth of graphene across relatively large areas. However, copper is impermeable, requiring the group to transfer the graphene to a porous substrate following fabrication.

However, O'Hern noticed that this transfer process would create tears in graphene. What's more, he observed intrinsic defects created during the growth process, resulting perhaps from impurities in the original material.

Plugging graphene's leaks

To plug graphene's leaks, the team came up with a technique to first tackle the smaller intrinsic defects, then the larger transfer-induced defects. For the intrinsic defects, the researchers used a process called "atomic layer deposition," placing the graphene membrane in a vacuum chamber, then pulsing in a hafnium-containing chemical that does not normally interact with graphene. However, if the chemical comes in contact with a small opening in graphene, it will tend to stick to that opening, attracted by the area's higher surface energy.

The team applied several rounds of atomic layer deposition, finding that the deposited hafnium oxide successfully filled in graphene's nanometer-scale intrinsic defects. However, O'Hern realized that using the same process to fill in much larger holes and tears -- on the order of hundreds of nanometers -- would require too much time.

Instead, he and his colleagues came up with a second technique to fill in larger defects, using a process called "interfacial polymerization" that is often employed in membrane synthesis. After they filled in graphene's intrinsic defects, the researchers submerged the membrane at the interface of two solutions: a water bath and an organic solvent that, like oil, does not mix with water.

In the two solutions, the researchers dissolved two different molecules that can react to form nylon. Once O'Hern placed the graphene membrane at the interface of the two solutions, he observed that nylon plugs formed only in tears and holes -- regions where the two molecules could come in contact because of tears in the otherwise impermeable graphene -- effectively sealing the remaining defects.

Using a technique they developed last year, the researchers then etched tiny, uniform holes in graphene -- small enough to let water molecules through, but not larger contaminants. In experiments, the group tested the membrane with water containing several different molecules, including salt, and found that the membrane rejected up to 90 percent of larger molecules. However, it let salt through at a faster rate than water.

The preliminary tests suggest that graphene may be a viable alternative to existing filtration membranes, although Karnik says techniques to seal its defects and control its permeability will need further improvements.

"Water desalination and nanofiltration are big applications where, if things work out and this technology withstands the different demands of real-world tests, it would have a large impact," Karnik says. "But one could also imagine applications for fine chemical- or biological-sample processing, where these membranes could be useful. And this is the first report of a centimeter-scale graphene membrane that does any kind of molecular filtration. That's exciting."


Story Source:

Materials provided by Massachusetts Institute of Technology. Note: Content may be edited for style and length.


Journal Reference:

  1. Sean C. O’Hern, Doojoon Jang, Suman Bose, Juan-Carlos Idrobo, Yi Song, Tahar Laoui, Jing Kong, Rohit Karnik. Nanofiltration across Defect-Sealed Nanoporous Monolayer Graphene. Nano Letters, 2015; 150427124208006 DOI: 10.1021/acs.nanolett.5b00456

Cite This Page:

Massachusetts Institute of Technology. "Faster, more durable water filters: Plugging up leaky graphene." ScienceDaily. ScienceDaily, 7 May 2015. <www.sciencedaily.com/releases/2015/05/150507135921.htm>.
Massachusetts Institute of Technology. (2015, May 7). Faster, more durable water filters: Plugging up leaky graphene. ScienceDaily. Retrieved March 28, 2024 from www.sciencedaily.com/releases/2015/05/150507135921.htm
Massachusetts Institute of Technology. "Faster, more durable water filters: Plugging up leaky graphene." ScienceDaily. www.sciencedaily.com/releases/2015/05/150507135921.htm (accessed March 28, 2024).

Explore More

from ScienceDaily

RELATED STORIES