Featured Research

from universities, journals, and other organizations

Wetter Report: New Approach To Testing Surface Adhesion

Date:
May 13, 2007
Source:
National Institute of Standards and Technology
Summary:
Polymer scientists have devised a convenient way to construct test surfaces with a variable affinity for water, so that the same surface can range from superhydrophilic to superhydrophobic, and everything in between. Their technique may be used for rapid evaluation of paints and other materials that need to stick to surfaces.

Wetability gradient: Water sprayed on a glass slide coated with a nanostructured gradient wettability film using the new NIST technique illustrates the transition from (A) superhydrophobicity to (C) superhydrophilicity. The lower image shows the magnified image of the (A) hydrophobic to (B) transition wetting region. The pink dotted line indicates the border of the superhydrophobic region, and the yellow dotted region shows a hydrophobic 'sticky' region.
Credit: NIST

With a nod to one of nature's best surface chemists--an obscure desert beetle--polymer scientists at the National Institute of Standards and Technology (NIST) have devised a convenient way to construct test surfaces with a variable affinity for water, so that the same surface can range from superhydrophilic to superhydrophobic, and everything in between. Their technique, reported in a recent issue of the journal Langmuir,* may be used for rapid evaluation of paints and other materials that need to stick to surfaces.

Related Articles


The NIST team developed a flexible technique, based on ultraviolet light and photosensitive materials, to mimic one of nature's cleverest feats of surface chemistry. The Stenocara beetle of Africa's Namib Desert is able to thrive in a habitat so parched that not even the morning fog will condense. All the beetle has to do is raise its warty-looking wing covers into the breeze.

Because the bumps are hydrophilic, or water-attracting, while the rest of the surface is hydrophobic, or water-repelling, the few water molecules that do strike the wing covers tend to get pushed uphill and collect on the bumps--where they eventually condense into artificial dewdrops that roll into the insect's mouth. The insect's trick is to use both surface structure and chemistry to create a surface that shifts rapidly from hydrophobic to hydrophilic.

The NIST researchers begin by coating the surface with a matrix of silica granules about 11 nanometers across. As with the beetle, whose wing covers are coated with organic particles about a thousand times larger, the spacing of the matrix provides a first, purely physical level of control over wettability: a water droplet placed atop the granules can sag only just so far into the gaps before it is stopped by surface tension.

The researchers then add a second level of control by coating the granules with a compound that changes their water affinity, in much the same way that a waxy substance makes some of the beetle's microparticles hydrophobic. This step in itself is not unique; other research groups have added such compounds to granular surfaces using electrochemical techniques.

The NIST group's innovation is to use an optical technique that is much easier to modulate, and that can be carried out in air. They simply coat the granules with a photosensitive material, and expose it to ultraviolet light: the longer and more intense the exposure in a given area, the more hydrophilic that area becomes.

The new technique's most immediate application is for testing paints, adhesives and other coatings: instead of daubing the compounds on dozens of surfaces one by one, researchers can now spread them over a single surface that tests the entire range of wettability within the space of a few centimeters. Other applications also are possible, ranging from water collection in dry regions to open-air microchannel devices. Indeed, the same technique can be used to create surfaces that vary in their affinity for alcohol and many other small molecule liquids.

* J.T. Han, S. Kim and A. Karim. UVO-tunable superhydrophobic to superhydrophilic wetting transition on biomimetic nanostructured surfaces. Langmuir 2007, 23, 2608-2614.


Story Source:

The above story is based on materials provided by National Institute of Standards and Technology. Note: Materials may be edited for content and length.


Cite This Page:

National Institute of Standards and Technology. "Wetter Report: New Approach To Testing Surface Adhesion." ScienceDaily. ScienceDaily, 13 May 2007. <www.sciencedaily.com/releases/2007/05/070511091023.htm>.
National Institute of Standards and Technology. (2007, May 13). Wetter Report: New Approach To Testing Surface Adhesion. ScienceDaily. Retrieved December 18, 2014 from www.sciencedaily.com/releases/2007/05/070511091023.htm
National Institute of Standards and Technology. "Wetter Report: New Approach To Testing Surface Adhesion." ScienceDaily. www.sciencedaily.com/releases/2007/05/070511091023.htm (accessed December 18, 2014).

Share This


More From ScienceDaily



More Matter & Energy News

Thursday, December 18, 2014

Featured Research

from universities, journals, and other organizations


Featured Videos

from AP, Reuters, AFP, and other news services

3D Printed Cookies Just in Time for Christmas

3D Printed Cookies Just in Time for Christmas

Reuters - Innovations Video Online (Dec. 18, 2014) A tech company in Spain have combined technology with cuisine to develop the 'Foodini', a 3D printer designed to print the perfect cookie for Santa. Ben Gruber reports. Video provided by Reuters
Powered by NewsLook.com
How Sony Hopes To Make Any Glasses 'Smart'

How Sony Hopes To Make Any Glasses 'Smart'

Newsy (Dec. 17, 2014) Sony's glasses module attaches to the temples of various eye- and sunglasses to add a display and wireless connectivity. Video provided by Newsy
Powered by NewsLook.com
Los Angeles Police To Receive 7,000 Body Cameras

Los Angeles Police To Receive 7,000 Body Cameras

Newsy (Dec. 17, 2014) Los Angeles Mayor Eric Garcetti announced the cameras will be distributed starting Jan. 1. Video provided by Newsy
Powered by NewsLook.com
Jaguar Unveils 360 Virtual Windshield Making Car Pillars Appear Transparent

Jaguar Unveils 360 Virtual Windshield Making Car Pillars Appear Transparent

Buzz60 (Dec. 17, 2014) Jaguar unveils a virtual 360 degree windshield that may be the most futuristic automotive development yet. Jen Markham explains. Video provided by Buzz60
Powered by NewsLook.com

Search ScienceDaily

Number of stories in archives: 140,361

Find with keyword(s):
Enter a keyword or phrase to search ScienceDaily for related topics and research stories.

Save/Print:
Share:

Breaking News:

Strange & Offbeat Stories


Space & Time

Matter & Energy

Computers & Math

In Other News

... from NewsDaily.com

Science News

Health News

Environment News

Technology News



Save/Print:
Share:

Free Subscriptions


Get the latest science news with ScienceDaily's free email newsletters, updated daily and weekly. Or view hourly updated newsfeeds in your RSS reader:

Get Social & Mobile


Keep up to date with the latest news from ScienceDaily via social networks and mobile apps:

Have Feedback?


Tell us what you think of ScienceDaily -- we welcome both positive and negative comments. Have any problems using the site? Questions?
Mobile: iPhone Android Web
Follow: Facebook Twitter Google+
Subscribe: RSS Feeds Email Newsletters
Latest Headlines Health & Medicine Mind & Brain Space & Time Matter & Energy Computers & Math Plants & Animals Earth & Climate Fossils & Ruins