Featured Research

from universities, journals, and other organizations

Taking the 'random' out of a random laser

Date:
July 15, 2013
Source:
Vienna University of Technology, TU Vienna
Summary:
Random Lasers are tiny structures emitting light irregularly into different directions. Scientists have now shown that these exotic light sources can be accurately controlled.

Random lasers are powered by a beam of light from above. Random scatterers inside the laser (yellow dots) lead to chaotic emission of light into all directions.
Credit: Image courtesy of Vienna University of Technology, TU Vienna

Random Lasers are tiny structures emitting light irregularly into different directions. Scientists at the Vienna University of Technology have now shown that these exotic light sources can be accurately controlled.

Related Articles


The light they emit is as unique as a fingerprint: random lasers are tiny devices with a light emission pattern governed by random scattering of light. Understanding the underlying details of random lasing action has only been achieved recently. Now scientists at the Vienna University of Technology have presented a method to steer the radiation emitted by a random laser into a pre-determined direction. What has started out as a curious idea now has the potential to become a useful new type of light source.

Randomness instead of Mirrors

In a conventional laser, light is reflected back and forth between two mirrors. Meanwhile, the light is amplified by the atoms of the laser until a laser beam is formed which exits on one of the two sides. "A random laser works without any mirrors," explains professor Stefan Rotter from the Institute of Theoretical Physics at the Vienna University of Technology. "It consists of a granular material in which light is randomly scattered and forced onto complicated paths." Along these paths the light is amplified. At which position it eventually exits the laser depends on the random inner structure of the laser material.

Optical Pumping

The laser has to be supplied with energy so that it can amplify light. Usually, the required energy comes from an external light source -- a technique called "optical pumping." Ordinary incoherent light is pumped into the laser from above, then it is converted into ordered, coherent laser light, which is radially emitted into all directions.

"The essential point is the way in which the random laser is pumped," says Stefan Rotter. "Our idea is to pump the laser not uniformly, but rather with a specific pattern, which is optimized such as to generate exactly the laser beam we want," says Rotter. The pumping pattern selectively stimulates certain regions of the random laser, which then cooperatively produce light emission in a very well defined direction.

Finding the right Pumping Pattern

To determine the right pumping pattern that leads to the desired laser beam, the scientists at the Vienna University of Technology employed extensive computer simulations. "We start with a randomly generated initial pumping pattern and calculate the resulting laser emission. The pumping pattern is then adjusted step by step until the laser sends out light in exactly the desired direction," says Rotter.

As all random lasers are different, this optimization process has to be carried out for each device individually -- but once the solution is known, the same laser beam can be created again and again. In principle, one could also steer the laser beam from a given direction to any other direction by changing the pumping pattern appropriately.

Stefan Rotter's team is cooperating with a research group in Paris, where random lasers are fabricated and studied in the lab. Together, the researches now want to test their findings in the experiment. If the experimental results indeed show that random lasers can be forced to relinquish their randomness, this would constitute a major step towards technological applications of these exotic new light sources.


Story Source:

The above story is based on materials provided by Vienna University of Technology, TU Vienna. Note: Materials may be edited for content and length.


Journal Reference:

  1. Thomas Hisch, Matthias Liertzer, Dionyz Pogany, Florian Mintert, Stefan Rotter. Pump-Controlled Directional Light Emission from Random Lasers. Physical Review Letters, 2013; 111 (2) DOI: 10.1103/PhysRevLett.111.023902

Cite This Page:

Vienna University of Technology, TU Vienna. "Taking the 'random' out of a random laser." ScienceDaily. ScienceDaily, 15 July 2013. <www.sciencedaily.com/releases/2013/07/130715070258.htm>.
Vienna University of Technology, TU Vienna. (2013, July 15). Taking the 'random' out of a random laser. ScienceDaily. Retrieved October 26, 2014 from www.sciencedaily.com/releases/2013/07/130715070258.htm
Vienna University of Technology, TU Vienna. "Taking the 'random' out of a random laser." ScienceDaily. www.sciencedaily.com/releases/2013/07/130715070258.htm (accessed October 26, 2014).

Share This



More Matter & Energy News

Sunday, October 26, 2014

Featured Research

from universities, journals, and other organizations


Featured Videos

from AP, Reuters, AFP, and other news services

IKEA Desk Converts From Standing to Sitting With One Button

IKEA Desk Converts From Standing to Sitting With One Button

Buzz60 (Oct. 24, 2014) IKEA is out with a new convertible desk that can convert from a sitting desk to a standing one with just the push of a button. Jen Markham explains. Video provided by Buzz60
Powered by NewsLook.com
Ebola Protective Suits Being Made in China

Ebola Protective Suits Being Made in China

AFP (Oct. 24, 2014) A factory in China is busy making Ebola protective suits for healthcare workers and others fighting the spread of the virus. Duration: 00:38 Video provided by AFP
Powered by NewsLook.com
Real-Life Transformer Robot Walks, Then Folds Into a Car

Real-Life Transformer Robot Walks, Then Folds Into a Car

Buzz60 (Oct. 24, 2014) Brave Robotics and Asratec teamed with original Transformers toy company Tomy to create a functional 5-foot-tall humanoid robot that can march and fold itself into a 3-foot-long sports car. Jen Markham has the story. Video provided by Buzz60
Powered by NewsLook.com
Police Testing New Gunfire Tracking Technology

Police Testing New Gunfire Tracking Technology

AP (Oct. 24, 2014) A California-based startup has designed new law enforcement technology that aims to automatically alert dispatch when an officer's gun is unholstered and fired. Two law enforcement agencies are currently testing the technology. (Oct. 24) Video provided by AP
Powered by NewsLook.com

Search ScienceDaily

Number of stories in archives: 140,361

Find with keyword(s):
Enter a keyword or phrase to search ScienceDaily for related topics and research stories.

Save/Print:
Share:

Breaking News:

Strange & Offbeat Stories


Space & Time

Matter & Energy

Computers & Math

In Other News

... from NewsDaily.com

Science News

Health News

Environment News

Technology News



Save/Print:
Share:

Free Subscriptions


Get the latest science news with ScienceDaily's free email newsletters, updated daily and weekly. Or view hourly updated newsfeeds in your RSS reader:

Get Social & Mobile


Keep up to date with the latest news from ScienceDaily via social networks and mobile apps:

Have Feedback?


Tell us what you think of ScienceDaily -- we welcome both positive and negative comments. Have any problems using the site? Questions?
Mobile: iPhone Android Web
Follow: Facebook Twitter Google+
Subscribe: RSS Feeds Email Newsletters
Latest Headlines Health & Medicine Mind & Brain Space & Time Matter & Energy Computers & Math Plants & Animals Earth & Climate Fossils & Ruins