Science News
from research organizations

Improved polymer and new assembly method for ultra-conformable 'electronic tattoo' devices

Process uses household inkjet printer without soldering to create 750 nm-thin elastomeric sheet

Date:
February 22, 2017
Source:
Waseda University
Summary:
Researchers have developed processes and materials for ultrathin devices using SBS elastomeric film, achieving ease of production, high elasticity and flexibility fifty times better than previously reported polymer nanosheets. Production of circuits with a household type inkjet printer, without the need for clean room conditions, along with fixing of electronic components without soldering promise to greatly increase wearing comfort and to radically lower barriers to manufacturing.
Share:
FULL STORY

This is a sandwich of printed circuits and SBS elastomer is just 750 nm thick, for extremely high flexibility and comfort.
Credit: Waseda University

A group of researchers at Waseda University has developed processes and materials for ultrathin stick-on electronic devices using elastomeric "nanosheet" film, achieving ease of production while also preserving high elasticity and flexibility fifty times better than previously reported polymer nanosheets.

This research is published in the Journal of Materials Chemistry C online edition, February 1, 2017.

Smart electronics and wearable devices have several requirements for widespread adoption, especially ease of fabrication and wearing comfort. The materials and processes developed by the Waseda University team represent huge strides forward in both criteria.

Inkjet printing of circuitry and low-temperature fixing allow production of electronic devices which are durable and functional but also extremely thin and flexible enough for use as a comfortable, skin-fitting appliance, while also maintaining the easy handling properties and protection of elastomeric films. At only 750 nm, the new film is ultra-thin and flexible. These advances could help change the nature of wearable electronics from objects like wristwatches to items less noticeable than a band-aid.

The Waseda team also established a method of joining electronic components without soldering, allowing thinner and more flexible elastomer films (SBS: polystyrene-polybutadiene-polystyrene). Conductive "wiring" is created by inkjet printing, which can be done with a household type printer without the need for clean room conditions. Further, conductive lines and elements such as chips and LEDs are connected by adhesive sandwiching between two elastomeric nanosheets, without using chemical bonding by soldering or special conductive adhesives.

Thanks to the simple, low-temperature processes, the resulting ultrathin structures achieve better adhesion, without using adhesive matter such as tape or glue, better elasticity and comfort for skin-contact applications. The new system was proven functional for several days on an artificial skin model.

These results were achieved through collaboration among three specialties: Molecular assembly and biomaterials science; medical robotics and rehabilitation engineering; and micro-electromechanical systems, thanks to collaborative structures at Waseda University.

Uses for these products are expected to include human-machine interfaces and sensors in the form of electronic tattoos, as radically improved tools for the fields of medicine, healthcare and sports training.

These applications are the subject of further investigation by the Waseda University Institute of Advanced Active Aging Research.


Story Source:

Materials provided by Waseda University. Note: Content may be edited for style and length.


Journal Reference:

  1. Marin Okamoto, Mizuho Kurotobi, Shinji Takeoka, Junki Sugano, Eiji Iwase, Hiroyasu Iwata, Toshinori Fujie. Sandwich fixation of electronic elements using free-standing elastomeric nanosheets for low-temperature device processes. J. Mater. Chem. C, 2017; 5 (6): 1321 DOI: 10.1039/c6tc04469g

Cite This Page:

Waseda University. "Improved polymer and new assembly method for ultra-conformable 'electronic tattoo' devices: Process uses household inkjet printer without soldering to create 750 nm-thin elastomeric sheet." ScienceDaily. ScienceDaily, 22 February 2017. <www.sciencedaily.com/releases/2017/02/170222102619.htm>.
Waseda University. (2017, February 22). Improved polymer and new assembly method for ultra-conformable 'electronic tattoo' devices: Process uses household inkjet printer without soldering to create 750 nm-thin elastomeric sheet. ScienceDaily. Retrieved May 28, 2017 from www.sciencedaily.com/releases/2017/02/170222102619.htm
Waseda University. "Improved polymer and new assembly method for ultra-conformable 'electronic tattoo' devices: Process uses household inkjet printer without soldering to create 750 nm-thin elastomeric sheet." ScienceDaily. www.sciencedaily.com/releases/2017/02/170222102619.htm (accessed May 28, 2017).

RELATED STORIES