Science News
from research organizations

Silver: The promising electrode winner for low-cost perovskite solar cells

Date:
October 14, 2015
Source:
Okinawa Institute of Science and Technology (OIST) Graduate University
Summary:
Researchers have identified a contributing factor to short lifetime in perovskite solar cells with silver electrodes. Currently, the most common electrode material in perovskite solar cells is gold, which is extremely expensive. The low-cost alternative to gold is silver, around 65 times cheaper.
Share:
FULL STORY

Flexible perovskite solar cell device before (top) and after (bottom) corrosion of the silver electrode. The device was prepared by Dr. Mikas Remeika.
Credit: Dr. Mikas Remeika

Perovskite solar cells are the rising star in photovoltaics. They absorb light across almost all visible wavelengths, they have exceptional power conversion efficiencies exceeding 20% in the lab, and they are relatively easy to fabricate. So, why are perovskite solar cells yet to be found on the top of our roofs? One problem is their overall cost, and another is that cheaper perovskite solar cells have a short lifespan. A study published in Advanced Materials Interfaces by the Energy Materials and Surface Sciences Unit at the Okinawa Institute of Science and Technology Graduate University (OIST), reveals a cause for the short lifetime of perovskite solar cells with silver electrodes.

Currently, the most common electrode material in perovskite solar cells is gold, which is extremely expensive. A low-cost alternative to gold is silver, around 65 times cheaper. To keep the cost even lower, the team wants to use solution-processed method to fabricate the layers of the solar cell, instead of expensive vacuum-based techniques. The problem of using silver electrodes and the solution-based method is that silver gets corroded within days of the solar cell fabrication. The corrosion makes the electrode turn yellow, and reduces the efficiency of the cell. The OIST team, headed by Prof. Yabing Qi, has demonstrated the cause of this degradation and proposed an explanation.

Perovskite solar cells are composed of a sandwich of layers that work together to transform light into electricity. Light is absorbed by the perovskite material and stimulates electron excitations, generating the so-called electron-hole pairs. In simple terms: when electrons are excited, they "jump and leave holes behind." Excited electrons and holes are transported in opposite directions by the adjacent layers of the solar cells, comprising of an electron-transport titanium dioxide layer, a spiro-MeOTAD hole-transport layer (HTL), a glass layer coated with a transparent conductive material, and a silver top electrode. The whole mechanism generates current, but it needs the correct functioning of each layer of the solar cell in order to work efficiently. "If one layer fails, the whole solar cell will suffer," explains Luis Ono, a staff scientist and group leader in Prof. Qi's unit.

In this study, the team analysed the composition of the corroded silver electrode and identified the formation of silver iodide as the reason for the electrode corrosion. The color change was due to the oxidation from silver to silver iodide. They also found that exposure to air accelerates the corrosion, when compared to dry nitrogen gas exposure.

The team proposed a mechanism for this damage: silver iodide forms because gas molecules from ambient air reach the perovskite material and degrade it forming iodine containing compounds. These iodine-containing compounds diffuse to the silver electrode and corrode it. The migration of both air molecules and iodine-containing compounds could happen through small pinholes present in the spiro-MeOTAD HTL layer (see animation). The pinholes present in the spiro-MeOTAD HTL layer produced with the solution-processed method were identified some months ago by Zafer Hawash, a PhD student in the same laboratory.

Replacing gold with silver and using the solution-processed method are key to bringing down the cost of the solar cells. The OIST team believes that understanding the corrosion mechanism is the first step in increasing the electrode lifetime. Since preventing the formation of pinholes in the spiro-MeOTAD HTL layer is essential for a longer cell lifetime, the team is also working on producing pinhole-free solar cells with the solution-process method, while the production of pinhole-free HTL with the vacuum-based method has already been published by the same group. "Perovskite-based solar cells show potential for commercial use as the next generation photovoltaic technology. Our goal is to design and fabricate large-area and low-cost photovoltaic modules with extended lifetime by employing appropriate HTLs and encapsulation materials," explains Qi.


Story Source:

Materials provided by Okinawa Institute of Science and Technology (OIST) Graduate University. Note: Content may be edited for style and length.


Journal Reference:

  1. Yuichi Kato, Luis K. Ono, Michael V. Lee, Shenghao Wang, Sonia R. Raga, Yabing Qi. Silver Iodide Formation in Methyl Ammonium Lead Iodide Perovskite Solar Cells with Silver Top Electrodes. Advanced Materials Interfaces, 2015; 2 (13) DOI: 10.1002/admi.201500195

Cite This Page:

Okinawa Institute of Science and Technology (OIST) Graduate University. "Silver: The promising electrode winner for low-cost perovskite solar cells." ScienceDaily. ScienceDaily, 14 October 2015. <www.sciencedaily.com/releases/2015/10/151014121152.htm>.
Okinawa Institute of Science and Technology (OIST) Graduate University. (2015, October 14). Silver: The promising electrode winner for low-cost perovskite solar cells. ScienceDaily. Retrieved May 28, 2017 from www.sciencedaily.com/releases/2015/10/151014121152.htm
Okinawa Institute of Science and Technology (OIST) Graduate University. "Silver: The promising electrode winner for low-cost perovskite solar cells." ScienceDaily. www.sciencedaily.com/releases/2015/10/151014121152.htm (accessed May 28, 2017).

RELATED STORIES