Science News
from research organizations

Explaining how 2-D materials break at the atomic level

Physicists found that to shed light on the cracking of MoS2, we must go beyond the theory used so far

Date:
January 18, 2017
Source:
Institute for Basic Science
Summary:
Physicists have found that to shed light on the cracking of MoS2, we must go beyond the theory used so far.
Share:
FULL STORY

Schematic representation of the crack propagation in 2-D MoS2 at the atomic level. Dislocations shown with red and purple dots are visible at the crack tip zone. Internal tensile stresses are represented by red arrows.
Credit: IBS

Cracks sank the 'unsinkable' Titanic; decrease the performance of touchscreens and erode teeth. We are familiar with cracks in big or small three-dimensional (3D) objects, but how do thin two-dimensional (2D) materials crack? 2D materials, like molybdenum disulfide (MoS2), have emerged as an important asset for future electronic and photoelectric devices. However, the mechanical properties of 2D materials are expected to differ greatly from 3D materials. Scientists at the Center for Integrated Nanostructure Physics (CINAP), within the Institute for Basic Science (IBS) published, on Nature Communications, the first observation of 2D MoS2 cracking at the atomic level. This study is expected to contribute to the applications of new 2D materials.

Obviously when a certain force is applied to a material a crack is created. Less obvious is how to explain and predict the shape and seriousness of a crack from a physics point of view. Scientists want to investigate which fractures are likely to expand and which are not .Materials are divided into ductile and brittle: Ductile materials, like gold, withstand large strains before rupturing; brittle materials, like glass, can absorb relatively little energy before breaking suddenly, without elongation and deformation. At the nano-level atoms move freer in ductile materials than in brittle materials; so in the presence of a pulling force (tensile stress) they can go out of position from the ordered crystal structure, or in technical terms -- they dislocate. So far, this explanation (Griffith model) has been applied to cracking phenomena in bulk, but it lacks experimental data at the atomic or nano-scale.

In this study, IBS scientists observed how cracks propagate on 2D MoS2 after a pore was formed either spontaneously or with an electron beam. "The most difficult point {of the experiments} was to use the electron beam to create the pore without generating other defects or breaking the sample," explains Thuc Hue Ly, first author of this study. "So we had to be fast and use a minimum amount of energy."

The atomic observations were done using real-time transmission electron microscopy. Surprisingly, even though MoS2 is a brittle material, the team saw atom dislocations 3-5 nanometers (nm) away from the front line of the crack, or crack tip. This observation cannot be explained with the Griffith model.

In order to create conditions that represent the natural environment, the sample was exposed to ultraviolet (UV) light. This caused the MoS2 to oxidize; atom dislocations occurred more rapidly and the stretched region expanded to 5-10 nm from the crack tip.

"The study shows that cracking in 2D materials is fundamentally different from cracking in 3D ductile and brittle materials. These results cannot be explained with the conventional material failure theory, and we suggest that a new theory is needed," explained Professor LEE Young Hee (CINAP).


Story Source:

Materials provided by Institute for Basic Science. Note: Content may be edited for style and length.


Journal Reference:

  1. Thuc Hue Ly, Jiong Zhao, Magdalena Ola Cichocka, Lain-Jong Li, Young Hee Lee. Dynamical observations on the crack tip zone and stress corrosion of two-dimensional MoS2. Nature Communications, 2017; 8: 14116 DOI: 10.1038/ncomms14116

Cite This Page:

Institute for Basic Science. "Explaining how 2-D materials break at the atomic level: Physicists found that to shed light on the cracking of MoS2, we must go beyond the theory used so far." ScienceDaily. ScienceDaily, 18 January 2017. <www.sciencedaily.com/releases/2017/01/170118083352.htm>.
Institute for Basic Science. (2017, January 18). Explaining how 2-D materials break at the atomic level: Physicists found that to shed light on the cracking of MoS2, we must go beyond the theory used so far. ScienceDaily. Retrieved May 23, 2017 from www.sciencedaily.com/releases/2017/01/170118083352.htm
Institute for Basic Science. "Explaining how 2-D materials break at the atomic level: Physicists found that to shed light on the cracking of MoS2, we must go beyond the theory used so far." ScienceDaily. www.sciencedaily.com/releases/2017/01/170118083352.htm (accessed May 23, 2017).

RELATED STORIES