Featured Research

from universities, journals, and other organizations

CT and 3-D printers used to recreate dinosaur fossils

Date:
November 20, 2013
Source:
Radiological Society of North America
Summary:
Data from computed tomography scans can be used with three-dimensional printers to make accurate copies of fossilized bones, according to new research.

3-D print of vertebral body.
Credit: Image courtesy of Radiological Society of North America

Data from computed tomography (CT) scans can be used with three-dimensional (3-D) printers to make accurate copies of fossilized bones, according to new research published online in the journal Radiology.

Related Articles


Fossils are often stored in plaster casts, or jackets, to protect them from damage. Getting information about a fossil typically requires the removal of the plaster and all the sediment surrounding it, which can lead to loss of material or even destruction of the fossil itself.

German researchers studied the feasibility of using CT and 3-D printers to nondestructively separate fossilized bone from its surrounding sediment matrix and produce a 3-D print of the fossilized bone itself.

"The most important benefit of this method is that it is non-destructive, and the risk of harming the fossil is minimal," said study author Ahi Sema Issever, M.D., from the Department of Radiology at Charité Campus Mitte in Berlin. "Also, it is not as time-consuming as conventional preparation."

Dr. Issever and colleagues applied the method to an unidentified fossil from the Museum für Naturkunde, a major natural history museum in Berlin. The fossil and others like it were buried under rubble in the basement of the museum after a World War II bombing raid. Since then, museum staff members have had difficulty sorting and identifying some of the plaster jackets.

Researchers performed CT on the unidentified fossil with a 320-slice multi-detector system. The different attenuation, or absorption of radiation, through the bone compared with the surrounding matrix enabled clear depiction of a fossilized vertebral body.

After studying the CT scan and comparing it to old excavation drawings, the researchers were able to trace the fossil's origin to the Halberstadt excavation, a major dig from 1910 to 1927 in a clay pit south of Halberstadt, Germany. In addition, the CT study provided valuable information about the condition and integrity of the fossil, showing multiple fractures and destruction of the front rim of the vertebral body.

Furthermore, the CT dataset helped the researchers build an accurate reconstruction of the fossil with selective laser sintering, a technology that uses a high-powered laser to fuse together materials to make a 3-D object.

Dr. Issever noted that the findings come at a time when advances in technology and cheaper availability of 3-D printers are making them more common as a tool for research. Digital models of the objects can be transferred rapidly among researchers, and endless numbers of exact copies may be produced and distributed, greatly advancing scientific exchange, Dr. Issever said. The technology also potentially enables a global interchange of unique fossils with museums, schools and other settings.

"The digital dataset and, ultimately, reproductions of the 3-D print may easily be shared, and other research facilities could thus gain valuable informational access to rare fossils, which otherwise would have been restricted," Dr. Issever said. "Just like Gutenberg's printing press opened the world of books to the public, digital datasets and 3-D prints of fossils may now be distributed more broadly, while protecting the original intact fossil."


Story Source:

The above story is based on materials provided by Radiological Society of North America. Note: Materials may be edited for content and length.


Journal Reference:

  1. Ahi Sema Issever, René Schilling, Benjamin Jastram, Oliver Wings and Daniela Schwarz. Reviving the Dinosaur: Virtual Reconstruction and Three-dimensional Printing of a Dinosaur Vertebra. Radiology, 2013

Cite This Page:

Radiological Society of North America. "CT and 3-D printers used to recreate dinosaur fossils." ScienceDaily. ScienceDaily, 20 November 2013. <www.sciencedaily.com/releases/2013/11/131120081430.htm>.
Radiological Society of North America. (2013, November 20). CT and 3-D printers used to recreate dinosaur fossils. ScienceDaily. Retrieved October 30, 2014 from www.sciencedaily.com/releases/2013/11/131120081430.htm
Radiological Society of North America. "CT and 3-D printers used to recreate dinosaur fossils." ScienceDaily. www.sciencedaily.com/releases/2013/11/131120081430.htm (accessed October 30, 2014).

Share This



More Fossils & Ruins News

Thursday, October 30, 2014

Featured Research

from universities, journals, and other organizations


Featured Videos

from AP, Reuters, AFP, and other news services

Dracula's Dungeon May Have Been Found in Turkey

Dracula's Dungeon May Have Been Found in Turkey

AP (Oct. 29, 2014) — Historians think they may have discovered a dungeon in Turkey where the Romanian prince who inspired Count Dracula was once held captive. (Oct. 29) Video provided by AP
Powered by NewsLook.com
Study Doesn't Prove Megalodons Are Extinct, Never Needed To

Study Doesn't Prove Megalodons Are Extinct, Never Needed To

Newsy (Oct. 27, 2014) — How and why a study about when the giant prehistoric shark Megalodon went extinct got picked up as "proof" that it is. Video provided by Newsy
Powered by NewsLook.com
One-of-a-Kind BMW 507 Boat Found After 6 Decades

One-of-a-Kind BMW 507 Boat Found After 6 Decades

Buzz60 (Oct. 27, 2014) — BMW made just one BMW 507 boat, but it was lost for decades until a young man found and restored it. TC Newman (@PurpleTCNewman) shows the gorgeous boat! Video provided by Buzz60
Powered by NewsLook.com
Deep Sea 'mushroom' Could Be Early Branch on Tree of Life

Deep Sea 'mushroom' Could Be Early Branch on Tree of Life

Reuters - Innovations Video Online (Oct. 24, 2014) — Miniature deep sea animals discovered off the Australian coast almost three decades ago are puzzling scientists, who say the organisms have proved impossible to categorise. Academics at the Natural History of Denmark have appealed to the world scientific community for help, saying that further information on Dendrogramma enigmatica and Dendrogramma discoides could answer key evolutionary questions. Jim Drury has more. Video provided by Reuters
Powered by NewsLook.com

Search ScienceDaily

Number of stories in archives: 140,361

Find with keyword(s):
 
Enter a keyword or phrase to search ScienceDaily for related topics and research stories.

Save/Print:
Share:  

Breaking News:

Strange & Offbeat Stories

 

Plants & Animals

Earth & Climate

Fossils & Ruins

In Other News

... from NewsDaily.com

Science News

Health News

    Environment News

    Technology News



    Save/Print:
    Share:  

    Free Subscriptions


    Get the latest science news with ScienceDaily's free email newsletters, updated daily and weekly. Or view hourly updated newsfeeds in your RSS reader:

    Get Social & Mobile


    Keep up to date with the latest news from ScienceDaily via social networks and mobile apps:

    Have Feedback?


    Tell us what you think of ScienceDaily -- we welcome both positive and negative comments. Have any problems using the site? Questions?
    Mobile iPhone Android Web
    Follow Facebook Twitter Google+
    Subscribe RSS Feeds Email Newsletters
    Latest Headlines Health & Medicine Mind & Brain Space & Time Matter & Energy Computers & Math Plants & Animals Earth & Climate Fossils & Ruins