New! Sign up for our free email newsletter.
Science News
from research organizations

Speed and absorption key to optimizing new type of rechargeable battery

Date:
August 10, 2021
Source:
Okinawa Institute of Science and Technology (OIST) Graduate University
Summary:
Rechargeable, lithium sulfur batteries are promising candidates to sustainably meet the world's energy demands, and a new study has put them one step closer to becoming readily available.
Share:
FULL STORY

Rechargeable batteries are a necessity to meet the world's growing energy demands in a sustainable fashion but not all are equal. Researchers in the Energy Materials and Surface Sciences Unit at the Okinawa Institute of Science and Technology Graduate University have worked to optimize a promising candidate of such energy sources -- lithium sulfur batteries. The study was published today in Nature Communications.

"Lithium sulfur batteries can store more energy than the lithium ion batteries that are already commercially available," said Dr. Hui Zhang, first author of this study. "To put this in numbers, an electric vehicle that runs on lithium ion batteries can drive an average of 300km before it needs to be charged. With the improved energy storage provided by lithium sulfur batteries, it should be possible to extend this to 500km."

The main challenge that has prevented lithium sulfur batteries from becoming commercialized is that the intermediate product is susceptible to dissolving. During the construction of the battery, the sulfur will react with the lithium to form a product. There are two stages to this. In the first stage, the product will be lithium polysulfide, which can easily dissolve into polysulfides. If this happens, the polysulfides will impair the performance of the battery, resulting in its lifespan being greatly reduced. To optimize the batteries, the lithium polysulfide needs to transform to the final product, either Li2S2 or Li2S, as quickly as possible. To do this, the researchers utilized two different materials -- TiO2, which absorbs the unwanted polysulfides, and TiN, which accelerates the process.

"Using these two materials, we developed a hybrid that is low cost and easy to apply," said Dr. Luis Ono, second author of this study. "We found that it had an excellent ability to improve the battery performance."

These materials are very sensitive. To maximize the battery's efficiency, the researchers worked on the scale of nanometers. They found that 10nm of TiN and 5nm of TiO2 created the most efficient product. With the polysulfides being absorbed and the whole process being accelerated, the batteries performance was greatly improved. This translated to a shorter charging time, a longer life between charges, and a greater overall lifespan. To establish this, the researchers ran the battery for 200 cycles and found that its efficiency was almost the same.

"We will continue to further optimize the materials to improve the performance," said Professor Yabing Qi, senior author of the study and head of the Energy Materials and Surface Sciences Unit at OIST. "There are a lot of brilliant minds working on lithium sulfur batteries and it's a really promising and exciting technology."

In summary:

  • High quality, rechargeable batteries are a necessity to sustainably meet the world's growing energy demands.
  • Lithium sulfur batteries are promising candidates for the next generation of these energy sources as they can store more energy than other rechargeable batteries.
  • For lithium sulfur batteries to become readily available, a common, dissolving issue during their construction needs to be overcome.
  • The researchers created a hybrid material that both accelerates the construction process, which reduced the likelihood of the issue occurring, and absorbs any unwanted products that may have been produced in the process.
  • The result was a lithium sulfur battery that had a longer life span, required a shorter charging time, and could run for more time between charges.

This study received support from the OIST Technology Development and Innovation Center's Proof-of-Concept Program.


Story Source:

Materials provided by Okinawa Institute of Science and Technology (OIST) Graduate University. Original written by Lucy Dickie. Note: Content may be edited for style and length.


Journal Reference:

  1. Hui Zhang, Luis K. Ono, Guoqing Tong, Yuqiang Liu, Yabing Qi. Long-life lithium-sulfur batteries with high areal capacity based on coaxial CNTs@TiN-TiO2 sponge. Nature Communications, 2021; 12 (1) DOI: 10.1038/s41467-021-24976-y

Cite This Page:

Okinawa Institute of Science and Technology (OIST) Graduate University. "Speed and absorption key to optimizing new type of rechargeable battery." ScienceDaily. ScienceDaily, 10 August 2021. <www.sciencedaily.com/releases/2021/08/210810104702.htm>.
Okinawa Institute of Science and Technology (OIST) Graduate University. (2021, August 10). Speed and absorption key to optimizing new type of rechargeable battery. ScienceDaily. Retrieved October 31, 2024 from www.sciencedaily.com/releases/2021/08/210810104702.htm
Okinawa Institute of Science and Technology (OIST) Graduate University. "Speed and absorption key to optimizing new type of rechargeable battery." ScienceDaily. www.sciencedaily.com/releases/2021/08/210810104702.htm (accessed October 31, 2024).

Explore More

from ScienceDaily

RELATED STORIES