New! Sign up for our free email newsletter.
Science News
from research organizations

Best in snow: New scientific device creates electricity from snowfall

The first-of-its-kind nanogenerator also acts as a weather station

Date:
April 15, 2019
Source:
University of California - Los Angeles
Summary:
Researchers have designed a new device that creates electricity from falling snow, a first. The device is inexpensive, small, thin and flexible like a sheet of plastic.
Share:
FULL STORY

UCLA researchers and colleagues have designed a new device that creates electricity from falling snow. The first of its kind, this device is inexpensive, small, thin and flexible like a sheet of plastic.

"The device can work in remote areas because it provides its own power and does not need batteries," said senior author Richard Kaner, who holds UCLA's Dr. Myung Ki Hong Endowed Chair in Materials Innovation. "It's a very clever device -- a weather station that can tell you how much snow is falling, the direction the snow is falling, and the direction and speed of the wind."

The researchers call it a snow-based triboelectric nanogenerator, or snow TENG. A triboelectric nanogenerator, which generates charge through static electricity, produces energy from the exchange of electrons.

Findings about the device are published in the journal Nano Energy.

"Static electricity occurs from the interaction of one material that captures electrons and another that gives up electrons," said Kaner, who is also a distinguished professor of chemistry and biochemistry, and of materials science and engineering, and a member of the California NanoSystems Institute at UCLA. "You separate the charges and create electricity out of essentially nothing."

Snow is positively charged and gives up electrons. Silicone -- a synthetic rubber-like material that is composed of silicon atoms and oxygen atoms, combined with carbon, hydrogen and other elements -- is negatively charged. When falling snow contacts the surface of silicone, that produces a charge that the device captures, creating electricity.

"Snow is already charged, so we thought, why not bring another material with the opposite charge and extract the charge to create electricity?" said co-author Maher El-Kady, a UCLA postdoctoral researcher of chemistry and biochemistry.

"While snow likes to give up electrons, the performance of the device depends on the efficiency of the other material at extracting these electrons," he added. "After testing a large number of materials including aluminum foils and Teflon, we found that silicone produces more charge than any other material."

About 30 percent of the Earth's surface is covered by snow each winter, during which time solar panels often fail to operate, El-Kady noted. The accumulation of snow reduces the amount of sunlight that reaches the solar array, limiting the panels' power output and rendering them less effective. The new device could be integrated into solar panels to provide a continuous power supply when it snows, he said.

The device can be used for monitoring winter sports, such as skiing, to more precisely assess and improve an athlete's performance when running, walking or jumping, Kaner said. It also has the potential for identifying the main movement patterns used in cross-country skiing, which cannot be detected with a smart watch.

It could usher in a new generation of self-powered wearable devices for tracking athletes and their performances.

It can also send signals, indicating whether a person is moving. It can tell when a person is walking, running, jumping or marching.

The research team used 3-D printing to design the device, which has a layer of silicone and an electrode to capture the charge. The team believes the device could be produced at low cost given "the ease of fabrication and the availability of silicone," Kaner said. Silicone is widely used in industry, in products such as lubricants, electrical wire insulation and biomedical implants, and it now has the potential for energy harvesting.


Story Source:

Materials provided by University of California - Los Angeles. Original written by Stuart Wolpert. Note: Content may be edited for style and length.


Journal Reference:

  1. Abdelsalam Ahmed, Islam Hassan, Islam M. Mosa, Esraa Elsanadidy, Gayatri S. Phadke, Maher F. El-Kady, James F. Rusling, Ponnambalam Ravi Selvaganapathy, Richard B. Kaner. All printable snow-based triboelectric nanogenerator. Nano Energy, 2019; 60: 17 DOI: 10.1016/j.nanoen.2019.03.032

Cite This Page:

University of California - Los Angeles. "Best in snow: New scientific device creates electricity from snowfall." ScienceDaily. ScienceDaily, 15 April 2019. <www.sciencedaily.com/releases/2019/04/190415160820.htm>.
University of California - Los Angeles. (2019, April 15). Best in snow: New scientific device creates electricity from snowfall. ScienceDaily. Retrieved December 11, 2024 from www.sciencedaily.com/releases/2019/04/190415160820.htm
University of California - Los Angeles. "Best in snow: New scientific device creates electricity from snowfall." ScienceDaily. www.sciencedaily.com/releases/2019/04/190415160820.htm (accessed December 11, 2024).

Explore More

from ScienceDaily

RELATED STORIES