New! Sign up for our free email newsletter.
Science News
from research organizations

Researchers create armored emulsions as tiny test tubes for parallel reactions

Date:
November 13, 2020
Source:
University of California - Los Angeles
Summary:
Bioengineers and mathematicians have invented the first-ever 'armored' emulsions. The armor comes in the form of tiny soft U-shaped cups, about a half-millimeter in length. With a hydrophobic (water-repelling) exterior and hydrophilic (water-attracting) interior, each U-shaped particle captures a fluid droplet resulting in an emulsion that stays intact following mixing.
Share:
FULL STORY

If you have ever shaken a salad dressing bottle mixed with oil and vinegar, you have temporarily created an emulsion. However, that state is temporary, and the two components soon separate. But, what if you could create a stable emulsion in which all of the tiny droplets stay at a uniform size for a long time? UCLA bioengineers and mathematicians have done just that, inventing the first-ever "armored" emulsions.

The armor comes in the form of tiny soft U-shaped cups, about a half-millimeter in length. With a hydrophobic (water-repelling) exterior and hydrophilic (water-attracting) interior, each U-shaped particle captures a fluid droplet resulting in an emulsion that stays intact following mixing. The technology opens up new avenues in pharmaceutical and chemical production, biological research and diagnostics.

A study detailing the research was recently published in Science Advances.

"They're like tiny test tubes, but thousands of times smaller than the ones currently used in laboratories," said study leader Dino Di Carlo, a bioengineering professor at UCLA Samueli School of Engineering and UCLA's Armond and Elena Hairapetian Professor of Engineering and Medicine.

"Unlike traditional test tubes, these ones automatically fill up to hold a volume of fluid about the size of a single cell. And as they're uniform in size, they are ideal to carry out repeatable chemical reactions. This is a fundamental requirement in biological research and health diagnostics."

In collaboration with Andrea Bertozzi, a distinguished professor of mathematics at UCLA and the Betsy Wood Knapp Professor for Innovation and Creativity, the team first created mathematical models describing how the geometry and surface properties of each cup interact with fluids to hold uniform volumes. The U-shaped cups are manufactured using a new microscale 3D-printing approach previously developed by Di Carlo's research group.

"This is one of the most interesting applications of minimal surfaces in geometry that I have seen in a long time," said Bertozzi, whose team used a numerical method first applied to simulate 3D volume tilings to study the optimal volume configurations for the particles.

The particles allow chemical reactions to occur on many individual cells simultaneously. Cells can be kept alive inside the emulsion and identified for a desired characteristic, such as a high production of enzymes or antibodies, or resistance to a drug. Because of the tiny entrapped liquid volumes, the products of reactions from small numbers of cells or molecules can accumulate to high levels within hours instead of days. These capabilities can be important for speeding up the discovery of new drugs and expediting health diagnostics, such as for bacterial infections or cardiovascular diseases.

In addition to imparting long-term stability on the emulsion, the U-shaped particles could introduce a range of other physical and biochemical properties. The surface chemistry of the particles can be modified to capture specific target markers of disease. In addition, the shape of the particles provides a unique method of identifying each reaction, similar to a barcoded number written on the side of a test tube. Another recent paper by the group, which was published in Lab on a Chip, expands on the number of possible particle shapes.

"We think this new 'lab-on-a-particle' approach shows promise to leapfrog previous 'lab-on-a-chip' systems by eliminating the need for complex pumping and control systems," Di Carlo said. "Making and using the armored emulsions are both quite easy with commonplace laboratory equipment like pipettes and centrifuges. This could allow more research labs around the world to conduct impactful research without significant investment on equipment."


Story Source:

Materials provided by University of California - Los Angeles. Note: Content may be edited for style and length.


Journal Reference:

  1. Chueh-Yu Wu, Mengxing Ouyang, Bao Wang, Joseph de Rutte, Alexis Joo, Matthew Jacobs, Kyung Ha, Andrea L. Bertozzi, Dino Di Carlo. Monodisperse drops templated by 3D-structured microparticles. Science Advances, 2020; 6 (45): eabb9023 DOI: 10.1126/sciadv.abb9023

Cite This Page:

University of California - Los Angeles. "Researchers create armored emulsions as tiny test tubes for parallel reactions." ScienceDaily. ScienceDaily, 13 November 2020. <www.sciencedaily.com/releases/2020/11/201113103732.htm>.
University of California - Los Angeles. (2020, November 13). Researchers create armored emulsions as tiny test tubes for parallel reactions. ScienceDaily. Retrieved December 11, 2024 from www.sciencedaily.com/releases/2020/11/201113103732.htm
University of California - Los Angeles. "Researchers create armored emulsions as tiny test tubes for parallel reactions." ScienceDaily. www.sciencedaily.com/releases/2020/11/201113103732.htm (accessed December 11, 2024).

Explore More

from ScienceDaily

RELATED STORIES