New! Sign up for our free email newsletter.
Science News
from research organizations

Research team detects additive manufacturing defects in real-time

Machine learning approach helps hit 100% prediction rate

Date:
January 6, 2023
Source:
University of Virginia School of Engineering and Applied Science
Summary:
Researchers can now detect the formation of keyhole pores, one of the most challenging defects common in additive manufacturing, with incredible accuracy.
Share:
FULL STORY

A research team led by Tao Sun, associate professor of materials science and engineering at the University of Virginia, has made new discoveries that can expand additive manufacturing in aerospace and other industries that rely on strong metal parts.

Their peer-reviewed paper was published Jan. 6, 2023, in Science Magazine: "Machine learning aided real-time detection of keyhole pore generation in laser powder bed fusion." It addresses the issue of detecting the formation of keyhole pores, one of the major defects in a common additive manufacturing technique called laser powder bed fusion, or LPBF.

Introduced in the 1990s, LPBF uses metal powder and lasers to 3-D print metal parts. But porosity defects remain a challenge for fatigue-sensitive applications like aircraft wings. Some porosity is associated with deep and narrow vapor depressions which are the keyholes.

The formation and size of the keyhole is a function of laser power and scanning velocity, as well as the materials' capacity to absorb laser energy. If the keyhole walls are stable, it enhances the surrounding material's laser absorption and improves laser manufacturing efficiency. If, however, the walls are wobbly or collapse, the material solidifies around the keyhole, trapping the air pocket inside the newly formed layer of material. This makes the material more brittle and more likely to crack under environmental stress.

Sun and his team, including materials science and engineering professor Anthony Rollett from Carnegie Mellon University and mechanical engineering professor Lianyi Chen from the University of Wisconsin-Madison, developed an approach to detect the exact moment when a keyhole pore forms during the printing process.

"By integrating operando synchrotron x-ray imaging, near-infrared imaging, and machine learning, our approach can capture the unique thermal signature associated with keyhole pore generation with sub-millisecond temporal resolution and 100% prediction rate," Sun said.

In developing their real-time keyhole detection method, the researchers also advanced the way a state-of-the-art tool -- operando synchrotron x-ray imaging -- can be used. Utilizing machine learning, they additionally discovered two modes of keyhole oscillation.

"Our findings not only advance additive manufacturing research, but they can also practically serve to expand the commercial use of LPBF for metal parts manufacturing," said Rollett. Rollet is also the co-director of the NextManufacturing Center at CMU.

"Porosity in metal parts remains a major hurdle for wider adoption of LPBF technique in some industries. Keyhole porosity is the most challenging defect type when it comes to real-time detection using lab-scale sensors because it occurs stochastically beneath the surface," Sun said. "Our approach provides a viable solution for high-fidelity, high-resolution detection of keyhole pore generation that can be readily applied in many additive manufacturing scenarios."


Story Source:

Materials provided by University of Virginia School of Engineering and Applied Science. Note: Content may be edited for style and length.


Journal Reference:

  1. Zhongshu Ren, Lin Gao, Samuel J. Clark, Kamel Fezzaa, Pavel Shevchenko, Ann Choi, Wes Everhart, Anthony D. Rollett, Lianyi Chen, Tao Sun. Machine learning–aided real-time detection of keyhole pore generation in laser powder bed fusion. Science, 2023; 379 (6627): 89 DOI: 10.1126/science.add4667

Cite This Page:

University of Virginia School of Engineering and Applied Science. "Research team detects additive manufacturing defects in real-time." ScienceDaily. ScienceDaily, 6 January 2023. <www.sciencedaily.com/releases/2023/01/230106144508.htm>.
University of Virginia School of Engineering and Applied Science. (2023, January 6). Research team detects additive manufacturing defects in real-time. ScienceDaily. Retrieved December 7, 2024 from www.sciencedaily.com/releases/2023/01/230106144508.htm
University of Virginia School of Engineering and Applied Science. "Research team detects additive manufacturing defects in real-time." ScienceDaily. www.sciencedaily.com/releases/2023/01/230106144508.htm (accessed December 7, 2024).

Explore More

from ScienceDaily

RELATED STORIES