Science News
from research organizations

Fluorescent holography: Upending the world of biological imaging

Researchers have designed and built a fluorescence-detection microscope that combines 3-D and high-resolution image processing

Date:
October 25, 2016
Source:
Colorado State University
Summary:
Optical microscopy experts are once again pushing the envelope of biological imaging. A research scientist in electrical engineering has designed and built a fluorescence-detection microscope that combines three-dimensional and high-resolution image processing that's also faster than comparable techniques.
Share:
FULL STORY

Spatiotemporal modulations of illumination intensity in the CHIRPT microscope are achieved by imaging a spinning modulation mask to the focal plane of the microscope. A spatial filter placed in the pupil plane of the objective lens allows illumination intensity to form by the interference of two beams in the object plane. The microscope and illumination intensity are shown here at a snapshot in time.
Credit: Jeff Field/Colorado State University

Optical microscopy experts at Colorado State University are once again pushing the envelope of biological imaging.

Jeffrey Field, a research scientist in electrical engineering and director of CSU's Microscope Imaging Network, has designed and built a fluorescence-detection microscope that combines three-dimensional and high-resolution image processing that's also faster than comparable techniques.

The work, with co-authorship by Randy Bartels, professor of electrical and computer engineering, and former postdoctoral researcher David Winters, has been published in Optica, the journal of the Optical Society of America. They named their new microscope CHIRPT: Coherent Holographic Image Reconstruction by Phase Transfer.

Field and other optics scientists work in a world of tradeoffs. For example: an advanced deep-tissue imaging technique called multiphoton fluorescence microscopy employs a short, bright laser pulse focused tight to one spot, and the fluorescence intensity from that one spot is recorded. Then, the laser moves to the next spot, then the next, to build up high-resolution 3D images. The technique offers subcellular detail, but it's relatively slow because it illuminates only one tiny spot at a time.

Other techniques, like spinning disk confocal microscopy, are faster because they shine light on multiple spots, not just one, and they scan simultaneously over a larger area. But unlike multiphoton, these techniques require collecting an image with a camera. As a result, fluorescent light emitted from the specimen is blurred on the camera, leading to loss in resolution, and with it, subcellular detail.

Call them greedy, but Field and colleagues want it all.

Their goal is working around each of these limitations -- speed, resolution, size of field -- to break through established boundaries in light microscopy.

Field and Bartels' new microscope builds upon a previously published technique, and permits digital re-focus of fluorescent light. It illuminates not one point, but multiple points by harnessing delocalized illumination spread over a large area. The physical principles they are using are similar to holography, in which scattered light is used to build a 3-D image.

Using a large illumination field, followed by back-end signal processing, the microscope can define distinct light modulation patterns of many points within the field of view. It builds up a 3-D image by combining the signals from all those distinct patterns.

"The idea is that you have a fluorophore at any point in the specimen, and the temporal structure of its fluorescence will be distinguishable from all others," Field said. "So you can have this huge array of fluorophores, and just with this single-pixel detector, you can tell where every one of them is in that 2D field."

So what does this new technique allow? Deep-tissue images in three dimensions, with better depth of field than comparable techniques. Depth of field, like in photography, means background images are in sharp focus along with the main image. And the CSU researchers can work at 600 frames per second, which is many times faster than established techniques.

With their new microscope, images can also be post-processed to remove aberrations that obscure the object of interest. It's akin to being able to focus a picture after it's been taken.

The CHIRPT microscope could allow biomedical researchers to produce sharp, 3-D images of cells or tissue over a much larger volume than conventional fluorescence microscopy methods allow. It could lead to things like imaging multicellular processes in real time that, with a conventional light microscope, could only be seen one cell at a time.


Story Source:

Materials provided by Colorado State University. Note: Content may be edited for style and length.


Journal Reference:

  1. Jeffrey J. Field, David G. Winters, Randy A. Bartels. Single-pixel fluorescent imaging with temporally labeled illumination patterns. Optica, 2016; 3 (9): 971 DOI: 10.1364/OPTICA.3.000971

Cite This Page:

Colorado State University. "Fluorescent holography: Upending the world of biological imaging: Researchers have designed and built a fluorescence-detection microscope that combines 3-D and high-resolution image processing." ScienceDaily. ScienceDaily, 25 October 2016. <www.sciencedaily.com/releases/2016/10/161025115446.htm>.
Colorado State University. (2016, October 25). Fluorescent holography: Upending the world of biological imaging: Researchers have designed and built a fluorescence-detection microscope that combines 3-D and high-resolution image processing. ScienceDaily. Retrieved May 27, 2017 from www.sciencedaily.com/releases/2016/10/161025115446.htm
Colorado State University. "Fluorescent holography: Upending the world of biological imaging: Researchers have designed and built a fluorescence-detection microscope that combines 3-D and high-resolution image processing." ScienceDaily. www.sciencedaily.com/releases/2016/10/161025115446.htm (accessed May 27, 2017).

RELATED STORIES