Science News
from research organizations

Novel nanotechnology technique makes table-top production of flat optics a reality

Date:
January 27, 2016
Source:
University of Illinois College of Engineering
Summary:
Researchershave developed a simplified approach to fabricating flat, ultrathin optics. The new approach enables simple etching without the use of acids or hazardous chemical etching agents.
Share:
FULL STORY

Experimentally obtained image of a Fresnel zone plate (left) for focusing light that is fabricated with plasmon-assisted etching. A two-dimensional array of pillar-supported bowtie nanoantennas [zoomed in image (right)] comprises this flat lens.
Credit: University of Illinois

Researchers from the University of Illinois at Urbana-Champaign have developed a simplified approach to fabricating flat, ultra-thin optics. The new approach enables simple etching without the use of acids or hazardous chemical etching agents.

"Our method brings us closer to making do-it-yourself optics a reality by greatly simplifying the design iteration steps," explained Kimani Toussaint, an associate professor of mechanical science and engineering who led the research published this week in Nature Communications. "The process incorporates a nanostructured template that can be used to create many different types of optical components without the need to go into a cleanroom to make a new template each time a new optical component is needed.

"In recent years, the push to foster increased technological innovation and basic scientific and engineering interest from the broadest sectors of society has helped to accelerate the development of do-it-yourself (DIY) components, particularly those related to low-cost microcontroller boards," Toussaint remarked. "Simplifying and reducing the steps between a basic design and fabrication is the primary attraction of DIY kits, but typically at the expense of quality. We present plasmon-assisted etching as an approach to extend the DIY theme to optics with only a modest tradeoff in quality, specifically, the table-top fabrication of planar optical components."

"Our method uses the intuitive design aspects of diffractive optics by way of simple surface modification, and the electric-field enhancement properties of metal nanoantennas, which are typically the building blocks of metasurfaces," stated Hao Chen, a former postdoctoral researcher in Toussaint's lab and first author of the paper, "Towards do-it-yourself planar optical components using plasmon-assisted etching."

According to Chen, laser light scans the template--a 2D array of gold pillar-supported bowtie nanoantennas (with an area of 80 x 80 square micrometers)--which is submerged in water, in a desired pattern in a microscope. The light-matter interaction, enhanced by the nanoantennas, produces a strong heating effect. As a result, the gold layer of the nanoantennas undergoes thermal expansion that works against its adhesion with their glass substrate. With certain amount of optical power, the force provided by thermal expansion allows the gold layer to break away from the substrate, etching the metal.

"Overall, the workload in the cleanroom is greatly reduced," Chen noted. "Once the template is ready, it is like a paper sheet. You can 'draw' all the optical elements you need on a 'canvas' using a conventional laser-scanning optical microscope."

The study demonstrated fabrication of various ultra-thin (characteristic dimension less than the optical wavelength), flat optical components using the same template. The specific optical components fabricated by the researchers included a flat focusing lens (also known as a Fresnel zone plate) with focal length of ~150 micrometers, a diffraction grating, and a holographic converter that imparts angular momentum to a standard optical beam.

According to the researchers, the PAE method and specialized template could also be used to enable preferential trapping and sorting of particles, to create so-called optofluidic channels "without walls."

Toussaint directs the PROBE laboratory in the Department of Mechanical Science and Engineering at Illinois. In addition to Toussaint and Chen, study co-authors include graduate student Qing Ding, former graduate student Abdul Bhuiya, and Harley T. Johnson, a professor of mechanical science and engineering at Illinois.


Story Source:

The above post is reprinted from materials provided by University of Illinois College of Engineering. The original item was written by Rick Kubetz. Note: Materials may be edited for content and length.


Journal Reference:

  1. Hao Chen, Abdul M. Bhuiya, Qing Ding, Harley T. Johnson, Kimani C. Toussaint Jr. Towards do-it-yourself planar optical components using plasmon-assisted etching. Nature Communications, 2016; 7: 10468 DOI: 10.1038/ncomms10468

Cite This Page:

University of Illinois College of Engineering. "Novel nanotechnology technique makes table-top production of flat optics a reality." ScienceDaily. ScienceDaily, 27 January 2016. <www.sciencedaily.com/releases/2016/01/160127121149.htm>.
University of Illinois College of Engineering. (2016, January 27). Novel nanotechnology technique makes table-top production of flat optics a reality. ScienceDaily. Retrieved July 28, 2016 from www.sciencedaily.com/releases/2016/01/160127121149.htm
University of Illinois College of Engineering. "Novel nanotechnology technique makes table-top production of flat optics a reality." ScienceDaily. www.sciencedaily.com/releases/2016/01/160127121149.htm (accessed July 28, 2016).

Share This Page: