Science News
from research organizations

Tension instability flattens thick block

Team experimentally proves decades-old theory, adding to pantheon of material functionality

Date:
September 29, 2016
Source:
Harvard John A. Paulson School of Engineering and Applied Sciences
Summary:
Imagine pulling or compressing a block of soft material -- like rubber -- equally in all directions. In 1948, an applied mathematician named Ronald Rivlin predicted that with the right amount of tensile force, a thick cube of soft material would suddenly deform into a thin, flat plate. Now, researchers have demonstrated for the first time experimentally that Rivlin was right.
Share:
FULL STORY

The team's experimental setup stretched a thick, soft elastomer -- made from silicon rubber -- at each of its corners. Under this biaxial tension, the sample's center deformed, breaking the geometrical symmetry and becoming suddenly flat.
Credit: Image courtesy of Johannes T.B. Overvelde/Harvard SEAS)

Imagine pulling or compressing a block of soft material -- like rubber -- equally in all directions. You wouldn't expect the block to deform much because of the nature of the material. However, in 1948, an applied mathematician named Ronald Rivlin predicted that with the right amount of tensile force, a thick cube of soft material would suddenly deform into a thin, flat plate.

For almost 70 years, this prediction remained purely theoretical. Materials scientists, hoping to add the instability to the pantheon of material functionality, were unable to prove the theory experimentally.

Recently, researchers at the Harvard John A. Paulson School of Engineering and Applied Sciences (SEAS) demonstrated for the first time experimentally that Rivlin was right. Using tensile -- stretching -- forces, the team triggered this instability in a centimeters-thick elastomer block, deforming it into a flat surface.

"We knew that this instability existed but no one was able to show it," said Katia Bertoldi, John L. Loeb Associate Professor of the Natural Sciences at SEAS and senior author of the paper. "We were able to identify a configuration that can be tested experimentally."

"This research uncovers a type of instability that can be triggered in soft, elastic bodies, and widens the design space for new architected materials that use instabilities to change or enhance their functionality," said Johannes T. B. Overvelde, first author of the paper and former graduate student at SEAS. "With this instability, we can create materials that can suddenly switch between behaviors by using simple triggers to change their geometry."

The research was described in Physical Review Letters.


Story Source:

Materials provided by Harvard John A. Paulson School of Engineering and Applied Sciences. Original written by Leah Burrows. Note: Content may be edited for style and length.


Journal Reference:

  1. Johannes T. B. Overvelde, David M. J. Dykstra, Rijk de Rooij, James Weaver, Katia Bertoldi. Tensile Instability in a Thick Elastic Body. Physical Review Letters, 2016; 117 (9) DOI: 10.1103/PhysRevLett.117.094301

Cite This Page:

Harvard John A. Paulson School of Engineering and Applied Sciences. "Tension instability flattens thick block: Team experimentally proves decades-old theory, adding to pantheon of material functionality." ScienceDaily. ScienceDaily, 29 September 2016. <www.sciencedaily.com/releases/2016/09/160929140712.htm>.
Harvard John A. Paulson School of Engineering and Applied Sciences. (2016, September 29). Tension instability flattens thick block: Team experimentally proves decades-old theory, adding to pantheon of material functionality. ScienceDaily. Retrieved May 29, 2017 from www.sciencedaily.com/releases/2016/09/160929140712.htm
Harvard John A. Paulson School of Engineering and Applied Sciences. "Tension instability flattens thick block: Team experimentally proves decades-old theory, adding to pantheon of material functionality." ScienceDaily. www.sciencedaily.com/releases/2016/09/160929140712.htm (accessed May 29, 2017).

RELATED STORIES