New! Sign up for our free email newsletter.
Science News
from research organizations

Could used beer yeast be the solution to heavy metal contamination in water?

A study shows that yeast, an abundant waste product from breweries, can filter out even trace amounts of lead

Date:
June 13, 2022
Source:
Massachusetts Institute of Technology
Summary:
A new study finds inactive yeast could be effective as an inexpensive, abundant, and simple material for removing lead contamination from drinking water supplies. The approach should be efficient and economic, even down to part-per-billion levels of contamination.
Share:
FULL STORY

A new analysis by researchers at MIT's Center for Bits and Atoms (CBA) has found that inactive yeast could be effective as an inexpensive, abundant, and simple material for removing lead contamination from drinking water supplies. The study shows that this approach can be efficient and economic, even down to part-per-billion levels of contamination. Serious damage to human health is known to occur even at these low levels.

The method is so efficient that the team has calculated that waste yeast discarded from a single brewery in Boston would enough to treat the city's entire water supply. Such a fully sustainable system would not only purify the water but also divert what would otherwise be a waste stream needing disposal.

The findings are detailed today in the journal Nature Communications Earth and Environment, in a paper by MIT Research Scientist Patritsia Statathou; Brown University postdoc and MIT Visiting Scholar Christos Athanasiou; MIT Professor Neil Gershenfeld, the director of CBA; and nine others at MIT, Brown, Wellesley College, Nanyang Technological University, and National Technical University of Athens.

Lead and other heavy metals in water are a significant global problem that continues to grow because of electronic waste and discharges from mining operations. In the U.S. alone, more than 12,000 miles of waterways are impacted by acidic mine-drainage-water rich in heavy metals, the country's leading source of water pollution. And unlike organic pollutants, most of which can be eventually broken down, heavy metals don't biodegrade, but persist indefinitely and bioaccumulate. They are either impossible or very expensive to completely remove by conventional methods such as chemical precipitation or membrane filtration.

Lead is highly toxic, even at tiny concentrations, especially affecting children as they grow. The European Union has reduced its standard for allowable lead in drinking water from 10 parts per billion to 5 parts per billion. In the U.S., the Environmental Protection Agency has declared that no level at all in water supplies is safe. And average levels in bodies of surface water globally are 10 times higher than they were 50 years ago, ranging from 10 parts per billion in Europe to hundreds of parts per billion in South America.

"We don't just need to minimize the existence of lead; we need to eliminate it in drinking water," says Stathatou. "And the fact is that the conventional treatment processes are not doing this effectively when the initial concentrations they have to remove are low, in the parts-per-billion scale and below. They either fail to completely remove these trace amounts, or in order to do so they consume a lot of energy and they produce toxic byproducts."

The solution studied by the MIT team is not a new one -- a process called biosorption, in which inactive biological material is used to remove heavy metals from water, has been known for a few decades. But the process has been studied and characterized only at much higher concentrations, at more than one part-per-million levels. "Our study demonstrates that the process can indeed work efficiently at the much lower concentrations of typical real-world water supplies, and investigates in detail the mechanisms involved in the process," Athanasiou says.

The team studied the use of a type of yeast widely used in brewing and in industrial processes, called S. cerevisiae, on pure water spiked with trace amounts of lead. They demonstrated that a single gram of the inactive, dried yeast cells can remove up to 12 milligrams of lead in aqueous solutions with initial lead concentrations below 1 part per million. They also showed that the process is very rapid, taking less than five minutes to complete.

Because the yeast cells used in the process are inactive and desiccated, they require no particular care, unlike other processes that rely on living biomass to perform such functions which require nutrients and sunlight to keep the materials active. What's more, yeast is abundantly available already, as a waste product from beer brewing and from various other fermentation-based industrial processes.

Stathatou has estimated that to clean a water supply for a city the size of Boston, which uses about 200 million gallons a day, would require about 20 tons of yeast per day, or about 7,000 tons per year. By comparison, one single brewery, the Boston Beer Company, generates 20,000 tons a year of surplus yeast that is no longer useful for fermentation.

The researchers also performed a series of tests to determine that the yeast cells are responsible for biosorption. Athanasiou says that "exploring biosorption mechanisms at such challenging concentrations is a tough problem. We were the first to use a mechanics perspective to unravel biosorption mechanisms, and we discovered that the mechanical properties of the yeast cells change significantly after lead uptake. This provides fundamentally new insights for the process."

Devising a practical system for processing the water and retrieving the yeast, which could then be separated from the lead for reuse, is the next stage of the team's research, they say.

"To scale up the process and actually put it in place, you need to embed these cells in a kind of filter, and this is the work that's currently ongoing," Stathatou says. They are also looking at ways of recovering both the cells and the lead. "We need to conduct further experiments, but there is the option to get both back," she says.

The same material can potentially be used to remove other heavy metals, such as cadmium and copper, but that will require further research to quantify the effective rates for those processes, the researchers say.

The team also included Marios Tsezos at the National Technical University of Athens, in Greece; John Gross at Wellesley College; Camron Blackburn, Filippos Tourlomousis, and Andreas Mershin at MIT's CBA; Brian Sheldon, Nitin Padture, Eric Darling at Brown University; and Huajian Gao at Brown University and Nanyang Technological University, in Singapore.


Story Source:

Materials provided by Massachusetts Institute of Technology. Original written by David L. Chandler. Note: Content may be edited for style and length.


Journal Reference:

  1. Patritsia M. Stathatou, Christos E. Athanasiou, Marios Tsezos, John W. Goss, L. Camron Blackburn, Filippos Tourlomousis, Andreas Mershin, Brian W. Sheldon, Nitin P. Padture, Eric M. Darling, Huajian Gao, Neil Gershenfeld. Lead removal at trace concentrations from water by inactive yeast cells. Communications Earth & Environment, 2022; 3 (1) DOI: 10.1038/s43247-022-00463-0

Cite This Page:

Massachusetts Institute of Technology. "Could used beer yeast be the solution to heavy metal contamination in water?." ScienceDaily. ScienceDaily, 13 June 2022. <www.sciencedaily.com/releases/2022/06/220613162753.htm>.
Massachusetts Institute of Technology. (2022, June 13). Could used beer yeast be the solution to heavy metal contamination in water?. ScienceDaily. Retrieved October 13, 2024 from www.sciencedaily.com/releases/2022/06/220613162753.htm
Massachusetts Institute of Technology. "Could used beer yeast be the solution to heavy metal contamination in water?." ScienceDaily. www.sciencedaily.com/releases/2022/06/220613162753.htm (accessed October 13, 2024).

Explore More

from ScienceDaily

RELATED STORIES